Select your vehicle
-13%

Pro Armor Traditional Half Door Titanium Metallic Gloss Graphics – P174G501TM

Pro Armor

Shop Pro Armor UTV Doors on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Titanium Metallic Gloss graphic kit for Pro Armor XP4 1000 Traditional half doors from 2017
  • Matched to a Titanium Metallic Gloss XP4 1000
  • Titanium, Black and Red color scheme
  • Arlon brand vinyl and backing
  • Part number P/AP174G501TM

Description

Overview

The Pro Armor Traditional Half Door Titanium Metallic Gloss graphics, part P/AP174G501TM, are made for Pro Armor XP4 1000 Traditional half doors. They are colored to match a Titanium Metallic Gloss XP4 1000 and are written for a 2017 RZR.

The scheme is Titanium, Black and Red in Arlon brand vinyl with Arlon backing. The vinyl applies firmly and holds up in weather and against fading.

Key features

  • Titanium Metallic Gloss colorway
  • Titanium, Black and Red color scheme
  • Traditional half door design
  • Arlon brand vinyl and backing
  • Model year 2017

Gloss versus matte finishes

A gloss finish reflects light and shows swirl marks more readily than a matte surface, so careful washing matters. Use plenty of water and a soft cloth, and avoid dragging grit across the vinyl. Over time, a gloss graphic can dull if it is cleaned with harsh pads or strong solvents, so keep the cleaning routine simple.

Titanium, black and red color schemes are often used to set off a door panel, but contrast between them makes small scuffs more visible. Check the edges after each trail session, since a lifting corner collects grit faster. Pressing a lifting corner down while the surface is clean and warm usually keeps the edge sealed.

  • Wash with soap and water
  • Avoid harsh solvents on the vinyl
  • Press lifting corners down promptly

Specifications

Brand Pro Armor
Part number P/AP174G501TM
Colorway Titanium Metallic Gloss
Color scheme Titanium, Black, Red
Material Arlon brand vinyl and backing
Door style Pro Armor XP4 1000 Traditional half door
Model year 2017

Vehicle fitment

The graphics are made for XP4 1000 Traditional half doors and a 2017 RZR, so verify your door and year before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Confirm the package contents match your installation plan before starting.

Questions & Answers

Does this kit fit XP4 1000 Traditional half doors?

Yes. The kit is made for XP4 1000 Traditional half doors with a 2017 model year. It is made for the half door style, not the Stealth door.

What colors does the Titanium Metallic Gloss kit use?

The color scheme is Titanium, Black and Red. The graphics are colored to match a Titanium Metallic Gloss XP4 1000, which is the colorway this kit is named for.

What is the vinyl made from?

Arlon brand vinyl with Arlon backing. It applies with a firm bond and holds up against weather and fading, which helps a gloss finish keep its shine outdoors.

How do I keep gloss graphics looking sharp?

Wash with mild soap and water and dry with a soft towel to avoid water spots. Avoid abrasive pads, which can dull the gloss. Check the edges periodically and press down any corners that begin to lift.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Armor UTV Doors on Amazon