Overview
The Pro Armor 11-inch Off-Road Flood LED Light Bar, part number A16UL164, is a flood-pattern light bar for UTVs. A flood pattern spreads light wide rather than throwing it far.
The bar uses 3-watt CREE LEDs and puts out 1800 lumens. Its housing is bezel-free, and it is rated IPX67 for waterproof and rustproof use. The bar is light in weight.
Key features
- Off-road flood pattern
- 3-watt CREE LEDs
- 1800 lumens of output
- Bezel-free design
- IPX67 certified waterproof and rustproof
- Lightweight design
- Deutsch quick-disconnect wiring
- Stainless U-shaped mounting system
Before you mount it
A flood bar is usually chosen to light the area close to the vehicle, such as the trail beside a UTV, a camp setup, or the work area around a trailer. Because the beam spreads wide, placement matters more than angle alone. Mount it where the light covers the ground you actually travel rather than the sky above it, and keep the lens clear of mud.
Wiring is the other half of the job. A fused relay protects the harness and keeps the switch from carrying the full load, which is the usual approach for light bars of this size. Run the leads away from moving parts, secure them with clips, and seal the connections so water does not wick into the plug.
Over time, check the bracket bolts after rough trails, since vibration loosens them, and wipe the lens when dust builds up. A cracked lens or fogging inside the housing is a sign that the seal has failed and the unit needs attention before it is used in wet weather.
- Confirm clearance before drilling any brackets
- Use a fused relay for the harness
- Re-tighten brackets after rough trails
Specifications
| Brand | Pro Armor |
|---|---|
| Part number | A16UL164 |
| Size | 11-inch |
| Beam pattern | Flood |
| LED type | 3-watt CREE |
| Output | 1800 lumens |
| Waterproof rating | IPX67 |
| Wiring | Deutsch quick disconnect |
| Mounting | Stainless U-shaped system |
| Fitment | Universal (not vehicle-specific) |
Vehicle fitment
This flood light bar is a universal part, not tied to one make, model or year. Check the mounting space on your UTV before ordering, because the bar can be placed in several locations.
Installation notes
Connect the Deutsch quick-disconnect harness through a fused relay, and check local rules before using the bar on public roads.
What’s included
The Deutsch quick-disconnect wiring and the stainless U-shaped mounting system are included.
Not included: no switch, relay or fuse is listed.









