Overview
The AMP-Research PowerStep, part number 77235-01A, is an automatic power-deploying running board built into a custom rocker rail. Its stepping surface sits 3 inches lower than the regular PowerStep, which makes it easier to climb into a tall truck. It is designed for 2017-2018 Ford F-250, F-350 and F-450 trucks.
The boards use die-cast aluminum and alloy components with a black powder coat finish. The rigid board is aircraft-quality aluminum, black-anodized and PTFE coated for corrosion protection. The load capacity is rated at 600 lb, and the boards are designed for use in snow, ice, dust, mud and dirt.
Key features
- Automatic power deployment that extends the boards when the door opens
- Stepping surface 3 inches lower than the regular PowerStep
- Integrated low-profile LED system built into the rocker rail
- Stainless steel hinge points and bearings
- Black-anodized, PTFE-coated aircraft-quality aluminum board and die-cast linkage components
- Weatherproof electric motor and wiring harness
- Load capacity rated at 600 lb
Installing into a rocker rail
A board built into a rocker rail changes the install compared with a bolt-on step. The rail section and motor housing have to be fitted before the board is set, so plan the sequence before removing trim. Check that the rail sits flush and that the board clears the body on each side of the truck.
Because the motor and harness are weatherproof but still electrical, route the wiring away from the rail edges and hinge points. Test the full deploy and retract cycle with the truck parked on level ground. Watch for uneven movement, unusual noise or a board that will not fully retract, and address those before the truck sees rough use.
- Fit the rail before setting the board
- Keep wiring clear of hinge points
- Test a full deploy and retract cycle
Specifications
| Brand | AMP-Research |
|---|---|
| Part number | 77235-01A |
| UPC | 815410013690 |
| Step height | Stepping surface 3 inches lower than the regular PowerStep |
| Load capacity | 600 lb |
| Finish | Black powder coat; black-anodized and PTFE coated |
| Materials | Die-cast aluminum and alloy components; aircraft-quality aluminum board |
| Hinges | Stainless steel hinge points and bearings |
| Warranty | 5 year/60,000 mile |
| Origin | Made in the USA |
Vehicle fitment
The board is designed for 2017-2018 Ford F-250, F-350 and F-450 trucks. Confirm fit for your cab and bed configuration before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the weatherproof motor and wiring harness are included, the job involves wiring the boards into the truck’s electrical system. Route the harness away from moving parts, then cycle the boards through a full deploy and retract to check the hinge action and motor.
What’s included
The weatherproof electric motor and wiring harness are included. Check the package contents for rocker rail mounting hardware before starting.









