Overview
The AMP-Research PowerStep XTreme, part number 78122-01A, is an electric power running board with dual motors and LED lights. It is designed for drivers who work in challenging environments, where mud, snow and ice are common, and it uses die-cast aluminum components with a high-texture powder-coat finish.
The XTreme follows the electric-powered design of the PowerStep line, with the boards deploying and retracting under motor power. Vehicle coverage for this part number is not established here, so confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Dual motors for more power when deploying and retracting.
- LED lights that illuminate the boards when deployed.
- Die-cast aluminum components for high strength and all-weather performance.
- High-texture powder-coat finish to resist corrosion and maximize traction.
- OEM-quality motors, drive system and wiring harness.
Keeping powered boards working
Electric running boards carry more moving parts than fixed steps, so their upkeep matters. The motors, gearing and wiring share space with mud, road salt and water. Clean the board tracks and pivot area after muddy or icy trips so debris does not bind the mechanism. A quick look at the harness and board edges every few weeks catches early wear before the step stops deploying.
When choosing a powered board, plan the harness route, mounting points and door clearance for your own vehicle. Some owners add a separate switch or shutoff so the step can be disabled off-road, and that choice should be made before the wiring is run. Heavy loads and frequent cycling put extra strain on the motors, so keep cargo off the boards.
- Wipe grit from the pivot area after rough trips
- Inspect harness clips for chafing near the frame
- Run a full deploy and retract cycle after any long drive
- Note slow or uneven travel as an early sign of wear
Specifications
| Brand | AMP-Research |
|---|---|
| Part number | 78122-01A |
| UPC | 815410013867 |
| Finish | Black, high-texture powder-coat |
| Construction | Die-cast aluminum components |
| Lighting | LED, illuminates boards when deployed |
| Length | Wheel to wheel |
| Warranty | 5-year 60,000 mile |
| Fitment label | Direct Fit |
Vehicle fitment
Before ordering, match the year, model and trim of the covered vehicles against your own truck.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the boards run on electric motors, the wiring harness routing must be planned before mounting. Keep the harness clear of moving parts and check every connection before the first deployment test.
What’s included
Verify the motors, drive system and wiring harness against your installation before starting.














