Overview
The AMP Research PowerStep Override Switch is a dash-mounted toggle that lets you raise or lower PowerStep running boards by hand instead of leaving them to the doors. It is designed for the PowerStep, PowerStep XL and PowerStep XTreme steps.
The switch has three positions. Up holds the steps retracted, the middle position returns them to automatic control, and down holds them deployed. Down suits washing the truck, and up suits off-road driving.
Key features
- Override Retract (Up) keeps the steps up and out of the way regardless of the doors.
- Automatic Mode (middle) lets the doors deploy and retract the steps.
- Override Deploy (Down) keeps the steps down and ready for use.
- Toggle switch installs on the dash and wires directly to the PowerStep controller.
- Works only with the new type controller that has 8-pin and 9-pin plugs.
- Covers the PowerStep, PowerStep XL and PowerStep XTreme models.
Using manual override
A dash override switch gives you control when the doors are not the right trigger, such as when you want the steps down for washing or up for rough trails. Placing the switch within easy reach of the driver makes it useful day to day. Keep it in automatic mode for normal driving so the steps follow the doors.
Check wiring before you mount the switch. Route the wire away from heat, moving parts and sharp edges, and keep connections dry. A switch that is used often can wear its internal contacts, so inspect it for stiffness or intermittent response. If the steps do not respond, check the controller plug and power before replacing the switch.
- Keep the switch in automatic for daily use
- Route the wire away from heat
- Check connector seals after washing
Specifications
| Brand | AMP Research |
|---|---|
| Product | PowerStep Override Switch |
| Switch type | Three-position toggle |
| Mounting | Dash |
| Wiring | Direct to PowerStep controller |
| Controller required | New type controller with 8-pin and 9-pin plug |
| Compatible steps | PowerStep, PowerStep XL, PowerStep XTreme |
Vehicle fitment
This switch works with PowerStep, PowerStep XL and PowerStep XTreme steps. Compatibility depends on the step model and controller type, so confirm the controller plug before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the controller has the 8-pin and 9-pin plug before wiring the switch, because it will not work with older controllers. Mount the switch on the dash and route the wire to the PowerStep controller.
What’s included
The switch with its three-position toggle is included. Check the package contents against your installation before starting, including dash mounting hardware and wire.








