Overview
The Power Stop S4728 is a pair of powder-coated performance brake calipers with brackets for 1999–2013 Chevrolet, GMC, Cadillac and Hummer trucks and SUVs, including the Silverado 1500 and 2500 HD, Sierra 2500 HD, Tahoe, Yukon XL and Hummer H2. One left and one right caliper make up the set.
The caliper and bracket are remanufactured in the USA and finished in a high-temperature red powder coat. The calipers bolt in place of the stock units. New premium boots and seals are fitted, and the caliper pins get high-temperature silicone lubricant. Confirm which axle your vehicle needs before ordering.
Key features
- Left and right calipers, with brackets
- Bolts in place of the stock calipers
- Remanufactured in the USA
- High-temperature red powder coat
- New premium boots and seals
- High-temperature silicone on the caliper pins
- Premium abutment clips where applicable
- Very wide fitment list across GM trucks and the Hummer H2
Checking fit before you buy
A set with a wide fitment range covers many GM trucks, but the range also means the year, cab and axle have to match your vehicle. Measure the old calipers, compare bracket shapes and confirm the hose fittings before ordering. Trucks with factory towing packages or aftermarket lift kits may have different brake setups, so confirm details against your specific build.
Heavy trucks put more heat into the brakes, so pads and rotors are a useful check during a caliper swap. Replace worn parts that are easy to reach while the wheel is off, including the pads and the rotor, and clean the mounting surfaces. Keep fluid fresh, since moisture lowers the boiling point of brake fluid.
- Match year, cab and axle to your truck
- Measure original bracket mounting points
- Replace pads and rotors while the wheel is off
- Use fresh brake fluid after bleeding
Specifications
| Brand | Power Stop |
|---|---|
| Part number | S4728 |
| UPC | 792088929853 |
| Part type | Performance brake calipers with brackets |
| Axle | Rear in the position field; front in the short list |
| Set contents | 1 left caliper and 1 right caliper |
| Finish | High-temperature red powder coat |
| Remanufactured in | USA |
| Fit type | Direct fit |
Vehicle fitment
The S4728 fits the 2002–2006 Cadillac Escalade, 2003–2006 Escalade ESV, 2002–2006 Escalade EXT, 2002–2006 Chevrolet Avalanche 1500 and 2500, 1999–2006 Silverado 1500, 2001–2003 and 2005–2006 Silverado 1500 HD, 2007 Silverado 1500 HD Classic, 1999–2004 Silverado 2500, 2001–2010 Silverado 2500 HD, 2007 Silverado 2500 HD Classic, 2004–2006 Silverado 3500, 2007 Silverado 3500 Classic, 2008–2010 Silverado 3500 HD, 2000–2006 Suburban 1500, 2000–2013 Suburban 2500, 2000–2006 Tahoe, 1999–2006 GMC Sierra 1500, 2001–2003 and 2005–2006 Sierra 1500 HD, 2007 Sierra 1500 HD Classic, 1999–2004 Sierra 2500, 2001–2010 Sierra 2500 HD, 2007 Sierra 2500 HD Classic, 2004–2006 Sierra 3500, 2007 Sierra 3500 Classic, 2007–2010 Sierra 3500 HD, 2000–2006 Yukon, 2000–2006 Yukon XL 1500, 2000–2013 Yukon XL 2500 and 2003–2009 Hummer H2.
Years vary across the entries, with gaps such as 2004 for the Silverado 1500 HD. Confirm the axle and your vehicle’s year, model and trim before ordering.
Installation notes
These calipers replace the stock units directly. Before installing, confirm the axle your truck needs, then bleed the brakes and check pedal feel.
What’s included
- One left caliper and one right caliper
- Brackets included with the set
- New premium boots and seals
- High-temperature silicone for the caliper pins
- Premium abutment clips where applicable
Not included: pads, rotors, brake fluid and any hardware not listed above.









