Overview
The Power Stop S4299 is a front pair of powder-coated performance brake calipers for a wide run of 1988–1999 General Motors and Dodge trucks and SUVs, including the Chevrolet C1500, K1500 Suburban, Tahoe, GMC Yukon and 1994–1999 Dodge Ram 1500. The set contains one left and one right caliper.
The calipers are built for vehicle enthusiasts and fit in the original positions. The caliper and bracket are remanufactured in the USA, then finished in a red powder coat made to take high temperatures. New premium boots and seals are fitted, and the caliper pins receive high-temperature silicone lubricant. Because the fit covers many models and years, match the exact model and year of your truck before ordering.
Key features
- Front calipers sold as a left and right pair
- Bolt-in replacement for the stock calipers.
- Caliper and bracket remanufactured in the USA
- High-temperature red powder coat
- New premium boots and seals
- Silicone pin lubricant rated for high temperature
- Abutment clips supplied where applicable
- Long fitment list across Chevrolet, GMC, Cadillac and Dodge
Matching caliper and truck
Full-size trucks and SUVs from this era vary in brake size, hub design and bracket position even within the same name, so a caliper that fits one year may not fit another. Measure the bracket bolt pattern and rotor thickness before ordering, and compare the caliper’s inlet fitting with the hose on the truck.
Front calipers on heavy vehicles do most of the stopping work, so an aging caliper can cause uneven braking across the axle. Replacing both sides together keeps clamping force balanced. Brake hoses that are old or cracked should be replaced at the same time, since a failed hose can cause a sudden loss of braking.
- Keep the old pads for comparison during fitting
- Check rotor runout and thickness before reinstalling
- Inspect the wheel bearings during the same job
Specifications
| Brand | Power Stop |
|---|---|
| Part number | S4299 |
| UPC | 792088929723 |
| Part type | Powder-coated performance calipers |
| Position | Front |
| Set | 1 left caliper and 1 right caliper |
| Finish | High-temperature red powder coat |
| Remanufactured in | USA |
| Seals | New premium boots and seals |
| Fit type | Direct fit |
Vehicle fitment
Fits 1999–2000 Cadillac Escalade; 1992–1994 Chevrolet Blazer; 1988–1999 Chevrolet C1500; 1992–1999 Chevrolet C1500 Suburban; 1988–1998 Chevrolet C2500; 1992–1999 Chevrolet K1500 Suburban; 1988–1998 Chevrolet K2500; 1989 Chevrolet R2500; 1992–1994 Chevrolet S10 Blazer; 1995–1999 Chevrolet Tahoe; 1994–1999 Dodge Ram 1500; 1988–1999 GMC C1500; 1992–1994 and 1996–1999 GMC C1500 Suburban; 1988–1998 GMC C2500; 1988–1998 GMC K1500; 1992–1999 GMC K1500 Suburban; 1988–1989 GMC R2500; and 1995–1999 GMC Yukon.
The list is specific by model and year: for instance, the GMC C1500 Suburban skips 1995, and the K1500 pickup appears only for GMC. Models and years not named above, including later full-size trucks, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Power Stop says these calipers drop in where the stock units were, so no modification is described. Bleed the brakes afterward and check the pedal, because the calipers sit in the hydraulic circuit. Because the list covers many years, compare the old calipers with the new ones before assembly.
What’s included
- Front left and front right calipers
- Brackets remanufactured with the calipers.
- New premium boots and seals
- High-temperature silicone for the caliper pins
- Premium abutment clips where applicable
Not included: pads, rotors, brake fluid and other hardware not listed above.









