Overview
The Power Stop K1232 is a front Z23 Evolution Sport performance brake upgrade kit for the 1995–2004 Toyota Tacoma. It pairs drilled and slotted rotors with carbon fiber infused ceramic brake pads.
The K1232 is a front-axle kit with Evolution drilled and slotted rotors and Z23 carbon fiber infused ceramic pads. Rotors are silver zinc plated and coated, and brake lines are not included. It suits drivers who mix spirited driving with everyday commuting. The kit covers Tacomas from 1995 through 2004 and is aimed at street use rather than heavy towing. A separate Z36 Truck and Tow kit is sold for heavier loads. The Z23 kit includes hardware, a pin bushing kit and Hi-Temp lubricant.
Key features
- Front-axle kit for the first-generation Tacoma years listed.
- Evolution drilled and slotted performance rotors.
- Z23 carbon fiber infused ceramic pads.
- Premium hardware, a pin bushing kit and Hi-Temp lubricant.
- Slots increase pad bite and de-glaze the pad surface.
- Drilled holes and slots give debris, dust, gases and water an escape route.
- Rotors are coated.
Street driving and towing loads
Ceramic pads run quietly and leave less visible dust, which suits a truck that sees city traffic and highway commutes. They handle normal stops well, but repeated hard braking under heavy loads builds more heat than they are meant to carry. For that work, a metallic compound with a higher friction level is the usual choice. Matching the pad to the way the truck is used is the simplest way to avoid disappointment.
Front brakes do most of the stopping on a light truck, so their wear shows up first. When replacing rotors, clean the hub face and check that the new rotor sits flat against it. Inspect the caliper slide pins and the rubber boots, because a sticking pin can drag one pad and heat the rotor. Check brake fluid level and condition at the same time, and bed in the new pads at low speed before normal driving.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1232 |
| UPC | 792088533937 |
| Product type | Performance brake upgrade kit |
| Series | Z23 Evolution Sport |
| Brake position | Front |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z23 Evolution Sport carbon fiber infused ceramic |
| Hardware | Premium hardware, pin bushing kit and Hi-Temp lubricant |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1995–2004 Toyota Tacoma in Base and S-Runner trims.
- 1995–2004 Toyota Tacoma (Base, S-Runner)
Tacoma years from 2005 on, and other Toyota models, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K1232 is a front kit and comes with premium hardware, a pin bushing kit and Hi-Temp lubricant. Front rotors and pads are replaced together, and brake lines remain as they are.
What’s included
Evolution drilled and slotted rotors, Z23 Evolution Sport ceramic pads, premium hardware, a pin bushing kit and Hi-Temp lubricant for the front axle.
Not included: Brake lines.









