Overview
The Power Stop K1140 is a front and rear Z23 Evolution Sport performance brake upgrade kit for the 2001–2003 Toyota Highlander. It carries drilled and slotted rotors and carbon fiber infused ceramic brake pads for both axles.
The K1140 pairs carbon fiber infused ceramic pads with drilled and slotted rotors for both axles. The rotors use Tru-Cast construction, are silver zinc plated and are coated. Brake lines are not included. A Highlander owner who wants all four corners refreshed with one part number can use this kit for the 2001–2003 model years. The front-only K1137 and rear-only K1148 cover narrower needs, while the K1140 combines the front and rear sets in one box.
Key features
- Front and rear parts in a single kit.
- Evolution drilled and slotted performance rotors.
- The K1140 uses Z23 Evolution Sport carbon fiber infused ceramic pads.
- Premium hardware, a pin bushing kit and Hi-Temp lubricant come with the K1140.
- Slots help increase pad bite and improve air circulation.
- Holes and slots offer debris, dust, gas and water an escape route.
- Direct fit for the three Highlander model years listed.
Choosing front, rear or both
Performance brake kits like this one replace rotors and pads together, which keeps friction surfaces matched and bedding predictable. On the road, drilled and slotted rotors help clear gas, water and pad dust from the contact area, which many drivers notice during repeated stops. Slots also give the pad edge a fresh bite. Ceramic pads generally run quieter and produce less visible dust than semi-metallic compounds, though they may feel firmer until fully bedded in.
Before choosing between a full set and a single axle, check how worn each end of the truck is. Front pads usually wear faster because they carry more braking load, so a front-only kit may be the first step for some owners. Caliper slide pins, boots and brake hoses should be inspected whenever rotors are replaced, since a seized pin can wear new pads unevenly. Replacing the pin bushing kit at the same time is a common practice. Bed in new pads with several moderate stops before heavy use.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1140 |
| UPC | 792088531209 |
| Product type | Performance brake upgrade kit |
| Series | Z23 Evolution Sport |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z23 Evolution Sport carbon fiber infused ceramic |
| Hardware | Premium hardware, pin bushing kit and Hi-Temp lubricant |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2001–2003 Toyota Highlander in Base and Limited trims.
- 2001–2003 Toyota Highlander (Base, Limited)
Highlander model years from 2004 on are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the K1140 spans both axles, set aside time for all four wheel positions. The supplied hardware, pin bushing kit and Hi-Temp lubricant are meant to go with the new rotors and pads.
What’s included
Evolution drilled and slotted rotors, Z23 Evolution Sport ceramic pads, premium hardware, a pin bushing kit and Hi-Temp lubricant for the front and rear axles.
Not included: Brake lines.









