Overview
The Power Stop SW-0505 is a front brake pad wear sensor for the 2010–2012 Mercedes-Benz GLK350, the 2012 ML350 and the 2012 ML550.
It is a direct plug-and-play replacement for electronic pad wear sensors, built to handle high temperatures with super conductive electrodes. Replacing the sensor whenever the pads are changed is the common practice, since sensors can fail under repeated high thermal cycling. Once pad wear reaches 50%, the on-dash indicator needs a new sensor to work properly.
Brake pad wear sensors are small electronic parts that tell the dashboard when the pads are worn. Power Stop says its sensors are made to withstand high temperatures and to assure good electrode conductivity, and that they are offered individually boxed or packaged with pads in its Euro-Stop program.
Once pad wear reaches 50%, the sensor must be replaced for the on-dash indicator to function, even when the pads are replaced. The replacement is a straightforward install. Catalog number PSTSW-0505; UPC 792088524348.
Key features
- Front brake pad wear sensor
- Direct plug-and-play replacement for electronic pad wear sensors
- Withstands heat stress up to 500 degrees
- Super conductive electrodes for good electrode conductivity
- Sensor replacement recommended with every brake job
- Needed for the on-dash indicator to work correctly once pad wear reaches 50%
- Part of the Euro-Stop program
Choosing a replacement sensor
Electronic pad wear sensors are small contacts that send a signal to the dash when the friction material has worn to its limit. The indicator depends on the sensor’s electrical condition as well as pad thickness, so a sensor that was removed, damaged or heat-stressed should not be reused. Before fitting a replacement, look over the connector for corrosion and confirm the lead is routed clear of the rotor and the wheel.
When pads are changed, replace the sensor at the same time. Remove the old unit carefully so the plug and mounting point are not damaged, and confirm the new sensor seats fully before reassembly. After the first few drives, check the dash for warning lights, since a loose connection can cause a false reading.
- Clean the sensor seat before fitting
- Keep the lead away from moving suspension parts
Specifications
| Brand | Power Stop |
|---|---|
| Part number | SW-0505 |
| Catalog number | PSTSW-0505 |
| UPC | 792088524348 |
| Part type | Brake pad wear sensor |
| Position | Front |
| Heat resistance | Up to 500 degrees |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Power Stop SW-0505 covers the 2010–2012 Mercedes-Benz GLK350 (4Matic, Base), the 2012 Mercedes-Benz ML350 (4Matic, Bluetec 4Matic) and the 2012 Mercedes-Benz ML550 (Base).
The list does not include GLK350 or ML-Class model years outside those shown, or other Mercedes-Benz models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake components are safety-critical, so professional installation is recommended. Follow the vehicle’s service procedure, tighten fasteners to the specified torque, and test braking at low speed in a safe area before normal driving. Re-check fasteners and the brake system after the first miles of driving.
What’s included
The Power Stop SW-0505 comes as one front pad wear sensor.
Not included: Brake pads are not included.









