Overview
The Power Slot 950.65003 is a front brake line kit with a Teflon inner line wrapped in a stainless steel woven braid. The fitment entry is stock height, 0 to 2 inches of lift.
Confirm the brand and part number match the front lines you are replacing before ordering.
Key features
- Teflon inner line
- Stainless steel woven braid
- Resists expansion under pressure
- Does not degrade from brake fluid exposure
- Stock applications, 0 to 2 inches of lift
Front line replacement checklist
Front brake lines are exposed to road debris, heat from the rotors and moisture, so they are a common place for chafing and corrosion to start. A braided line protects the inner tube from abrasion, but the outer braid can still wear where it rubs. Inspect the route for contact points and secure the line with the original clips or equivalent retainers.
Good installation practice starts with matching the line length and fitting type to the old line. Keep the new line free of twists, and avoid tight bends near the caliper where the hose moves with steering and suspension. Use new sealing washers and keep the fluid clean throughout the job.
Once the line is connected, bleed the brakes and check each fitting for seepage. Test the pedal at low speed in a clear area before normal driving, and recheck the connections after the first few drives.
- Compare the old line length with the new one
- Check the route for contact with suspension parts
- Use new sealing washers at each fitting
- Test the pedal at low speed before normal use
Specifications
| Brand | Power Slot |
|---|---|
| Part number | 950.65003 |
| UPC | 70000552589 |
| Position | Front |
| Material | Stainless steel braid over Teflon inner line |
| Lift application | Stock, 0 to 2 inches |
| Fitment type | Stock |
Vehicle fitment
For this front kit the only vehicle detail is a stock height range of 0 to 2 inches.
Lifted applications are outside the stated range. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the contents against your installation before starting, including fittings and hardware.








