Overview
The Oracle Lighting ORC3826-504 is a truck bed cargo light kit that lights the whole bed with dual IP68 waterproof strips. It is universal fit and is not built for a specific make or model.
The kit mounts with 3M adhesive backing. Installation takes under 15 minutes: remove the backing, set the kit firmly in place, then wire it to a 12V source such as the battery or an exterior light. It suits late-night work, camping and tailgating as well as everyday use.
Key features
- Dual IP68 waterproof strips
- Lights the entire truck bed
- 3M adhesive backing for mounting
- Wires to a 12V source such as a battery or exterior light
- Installation takes under 15 minutes.
- Universal fit, not vehicle-specific
Wiring a bed light safely
A bed light draws from the vehicle’s electrical system, so the wiring deserves as much care as the mounting. Run the feed through a fused 12V circuit and keep the route clear of hinges, tie-downs and moving parts. Cargo that shifts during a drive can snag loose wire, so secure the run at regular intervals with clips.
Choosing a switch helps prevent the bed light from draining the battery if it is left on. Many owners wire the kit through a switch on the dash or another convenient control point. Inspect the adhesive after a few weeks of use, especially in hot weather, and clean the mounting area again if it begins to lift.
- Use a fused 12V feed
- Keep wiring away from hinges and tie-downs
- Recheck adhesive after hot weather
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | ORC3826-504 |
| Waterproof rating | IP68 (dual strips) |
| Power | 12V source |
| Mounting | 3M adhesive backing |
| Fitment | Universal fit |
Vehicle fitment
The kit is universal fit and is not tied to a year, make or model. Because it is not vehicle-specific, the match depends on your bed size and mounting surface.
Mounting depends on your bed size and surface. Confirm your bed dimensions and that the surface can hold the adhesive before installing.
Installation notes
Wire the kit to a fused 12V connection, as you would with any lighting run from the battery. Route the wiring away from moving parts in the bed.
What’s included
The kit includes dual IP68 waterproof strips and 3M adhesive backing. Confirm the bundled parts match what you need before you begin the wiring.
















