Overview
The Recon 4′ Universal Bed Rail/Cargo Area Light Kit, part REC26417, lights the truck bed and cargo area with two flexible strips. It mounts out of sight underneath both bed rails and is completely weather-proof. It suits trucks with a bed topper, a tonneau cover or an open bed.
Each strip carries 4 LED light boxes, and each box holds six 1/4-watt white LEDs, for 48 white LEDs in total. The light reaches the farthest section of the bed when fitted from inside the cargo area.
Key features
- Two thick yet flexible strips
- 4 LED light boxes on each strip
- Six 1/4-watt LEDs in each light box
- 48 white LEDs in total
- The construction is completely weather-proof.
- Mounts out of sight underneath both bed rails
- Illuminates the bed from inside the cargo area
Routing bed rail lighting
Light kits that mount under bed rails depend on clean wire routing. Plan the path from the strips to the power source before fixing anything in place, and keep the wire clear of the rail edges and any moving latch. Protect the wire where it passes through the cab wall or floor with a grommet or sleeve, which keeps out water and abrasion.
Bed toppers and tonneau covers change how light reaches the bed. A topper can block the view of the strips from some angles, while a soft cover may sit against the lights when rolled. Check clearance with the cover in both positions, and use the strips as a cargo area aid rather than a work light.
- Route wire away from rail edges and latches
- Use grommets where wire passes through panels
- Recheck clearance with the topper or cover in place
Specifications
| Brand | Recon |
|---|---|
| Part number | REC26417 |
| Length | 4′ |
| Strips | 2 flexible strips |
| LED light boxes | 4 per strip |
| LEDs | 48 white, six 1/4-watt per box |
| Mounting | Underneath both bed rails |
| Fitment | Universal fit |
Vehicle fitment
This kit is universal fit and is not vehicle-specific, and no vehicle list is provided. The bed rail layout differs between trucks, so check your bed rail spacing against the 4′ strips before installing.
Compare the 4′ strip length with your bed rail layout, and consider whether a topper or tonneau cover will sit over the strips.
Installation notes
The strips mount from below the bed rails, so plan the wire routing before the strips are fixed in place. Run the feed through a fused circuit, as with any lighting wired from the battery.
What’s included
The kit includes two flexible strips, each with 4 LED light boxes. Verify the strips and their mounting hardware match your planned layout before you begin.











