Overview
The Oracle Lighting 5769J-001 is a white 7-inch LED headlight kit for the Jeep Gladiator. It is a plug-and-play package that installs without fabrication or cutting factory wiring. The kit also fits the 2018–2026 Jeep Wrangler JL.
The solid-state LED design is aimed at owners who want better night time visibility. The kit allows vertical and horizontal adjustment, so the light can be aimed at the road rather than at oncoming traffic.
Key features
- Plug-and-play connectors matched to the Gladiator
- Vertical and horizontal headlight adjustment
- Rugged solid-state LED design
- Optional colored halos for added customization
Aiming and connector checks
A plug-and-play headlight swap is mostly a matter of matching connectors and aim. Lay the new connectors beside the factory plugs before you start to confirm the shape and pin count line up. Mount the lamps, then aim them on level ground so the cutoff sits low enough for oncoming drivers.
Aiming is easiest against a flat wall or a marked garage floor. Adjust vertically first, then sideways, and recheck after the first drive. Suspension lift, tire changes and heavy loads all shift the beam, so aim again when any of those change. Keep the connector seals dry and clean the lens with mild soap.
- Compare connectors before removing the old lamp
- Aim on level ground after mounting
- Recheck aim after suspension or tire changes
- Keep connector seals clean and dry
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5769J-001 |
| Color | White |
| Headlight size | 7-inch |
| Lamp type | Solid-state LED |
| Connectors | Gladiator-specific Plug and Play |
| Adjustment | Vertical and horizontal |
Vehicle fitment
The kit fits the 2020–2021 Jeep Gladiator JT across its trims, including Launch Edition, Overland, Rubicon and Willys, and the 2018–2026 Jeep Wrangler JL in two-door and four-door trims. Jeep Wrangler JK and older generations are not covered.
The 2022 Gladiator is not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The connectors are matched to the Gladiator, so connector fit is the main check before installing. The vertical and horizontal adjustment is used to aim the light once it is installed.
What’s included
One white 7-inch LED headlight kit with plug-and-play connectors for the Gladiator.
Not included: Colored halos are an optional add-on and are not part of this kit.











