Overview
The Omix-ADA 12403.47 is the left tail light assembly with a black housing. Confirm fit for your vehicle’s year, model and trim before ordering. This assembly carries the rear taillamp and brake lamp on the left side.
Before you replace a tail light
A tail light assembly combines several lamps in one housing, usually the running light, brake light, turn signal and reverse light. When the lens or housing cracks, water can reach the sockets and cause corrosion, which often shows up as dim or flickering lamps. Replacing the whole assembly is a common repair once the housing is damaged, because the sockets and much of the wiring sit inside the same unit.
Before fitting a new assembly, inspect the harness plug for green or white corrosion and check the ground connection at the body. A poor ground causes many of the same symptoms as a failed lamp. After installation, test the brake lamp and turn signals with an assistant, then seal the connector if the vehicle sees water or mud.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 12403.47 |
| UPC | 804314144036 |
| Position | Left |
| Housing color | Black |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
A left side tail light assembly with a black housing.
Not included: Inspect the package contents, including bulbs and harness hardware, against your installation first.









