Overview
The Omix-Ada 17227.18 is a 12-volt replacement starter for the 2007–2011 Jeep Wrangler JK, covering 2-door and 4-door models. It is a direct OE replacement, and the starter has 10 teeth.
Transmission is the deciding match on this starter. Automatic transmission vehicles fit the 2007 and 2008 models, while manual transmission vehicles fit through 2011. Check your transmission type and model year together before fitting it.
Starter wear and ring gear
The starter is a 12-volt motor that turns the engine over through a small pinion gear. Each start puts wear on the pinion, the solenoid contacts and the ring gear teeth on the flywheel. When a starter begins to fail, the engine may crank slowly, click without turning, or keep running after the key is released.
On a Wrangler JK, transmission type affects how the starter is matched, so check that before fitting. When replacing the starter, clean the battery terminals, inspect the cables and look at the ring gear. A new starter on a damaged ring gear can wear quickly, so a visual check is worth the time.
- Test battery voltage before removing the starter
- Check the starter mounting bolts for tightness
- Inspect the neutral safety switch wiring
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17227.18 |
| UPC | 804314234195 |
| Type | Replacement starter |
| Voltage | 12-volt |
| Teeth | 10 |
| Torque rating | 100–150 ft-lbs |
| Body styles | 2-door and 4-door |
Vehicle fitment
It fits the 2007–2011 Jeep Wrangler JK. Automatic transmission models fit 2007 and 2008, and manual transmission models fit 2007 through 2011.
Wrangler TJ and LJ models and Wrangler JK years after 2011 fall outside the years covered. Make sure your year, model and trim match before ordering.









