Overview
The Omix-ADA Spindle Nut Socket (part number 16711.01) is a 2-1/16 inch thin wall deepwell socket for spindle nuts on Dana 25, 27 and 30 front axles.
It is built to original specifications as a direct OE replacement Jeep part and accessory.
Key features
- 2-1/16 inch thin wall deepwell design
- Built to original specifications as a direct OE replacement
- Made for Dana 25, 27 and 30 front axles
- Covered by a limited five year warranty.
Using a spindle nut socket
A spindle nut holds the wheel bearing preload, so the socket has to seat fully on the nut before any torque is applied. A thin wall deepwell design clears the spindle threads and fits into tight spaces behind the hub, which is why it is commonly used for this job.
Use a torque wrench for the final setting, and avoid sudden force that can round the flats of the nut. Clean the socket and the spindle threads before use, and check that the socket is square to the nut so the load spreads evenly across the flats.
- Seat the socket fully before applying torque
- Use a torque wrench for the final setting
- Keep the socket clean and free of grit
- Avoid impact tools unless the socket is rated for them
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16711.01 |
| UPC | 804314068196 |
| Socket size | 2-1/16 in |
| Socket style | Thin wall, deepwell |
| Axle compatibility | Dana 25, 27 and 30 front axles |
| Warranty | Limited five year warranty coverage applies. |
Vehicle fitment
Confirm your axle type, Dana 25, 27 or 30, before ordering, since the socket is made for those front axles.
Confirm your vehicle’s year, model and trim before ordering.









