Overview
The Omix-ADA plastic vent cap, part number 16561.01, is an axle vent hose vent cap. It fits a Dana 30 front axle, an AMC Model 20 rear axle, a Dana 44 rear axle and a Dana 300 transfer case.
Omix-ADA describes its parts as direct OE replacements built to original specifications, but no year, make, model or trim is given for this cap.
Key features
- Plastic vent cap for axle vent hoses
- Fits Dana 30 front and Dana 44 rear axles
- Fits AMC Model 20 rear axle and Dana 300 transfer case
- Direct OE replacement built to original specifications
Vent hoses and breathing
An axle vent cap keeps the axle breathing while the vent hose routes any pressure buildup away from the seals. As the axle warms and cools, air moves in and out through the vent, so a clean, open opening matters. When the vent is clogged, pressure can push lubricant past seals, leaving fluid on brake parts or on the outside of the housing.
Plastic caps are light and easy to fit, but they can crack or become brittle with age and exposure. Check the cap, the hose and its clamp whenever the axle is serviced. Replace the cap if it is cracked, and make sure the hose is routed away from water and mud so it stays clear during trail use.
- Check the cap for cracks or brittleness
- Inspect the hose for kinks or cracks
- Make sure the hose is clear of mud and water
- Replace the clamp if it is loose
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16561.01 |
| UPC | 804314034276 |
| Material | Plastic |
| Type | Axle vent hose vent cap |
| Listed applications | Dana 30 front axle, AMC Model 20 rear axle, Dana 44 rear axle, Dana 300 transfer case |
Vehicle fitment
Fitment is listed by axle and transfer case, not by vehicle. The application covers a Dana 30 front, AMC Model 20 rear, Dana 44 rear and Dana 300 transfer case.
Confirm your vehicle’s year, model and trim before ordering, and match the cap to one of these axle or transfer case designs.
What’s included
The package contains the plastic vent cap only.











