Overview
The Omix-Ada 17243.01 is a distributor point set, the mechanical contact breaker used in an older 4 cylinder 134 engine ignition. It is built to original specifications as a direct OE replacement.
It fits Jeep CJ3, CJ5 and CJ6 models from 1959 to 1971, several Willys 1-Ton, 463, 473, Panel, Sedan Delivery, Truck and Utility Wagon models from 1946 to 1955, and the Willys MB from 1941 to 1942.
Key features
- Direct OE replacement built to original specifications
- Distributor point set for 4 cylinder 134 engine ignition
- It comes with a limited five year warranty from Omix-Ada.
- It fits early Jeep CJ and Willys vehicles.
Setting points gap and timing
The point gap sets how far the points open, which controls the timing of the spark. As the rubbing block wears on the distributor cam, the gap slowly narrows and the spark arrives later. Setting the gap with a feeler gauge at the cam’s peak lobe is a routine task, and it should be repeated whenever the points are changed. A new set that is not adjusted correctly will run poorly even though it is new.
Clean the contact faces with a points file or fine abrasive before installing the set, and avoid touching them with bare fingers, since oil and skin residue can cause arcing. Apply a light smear of cam lubricant to the cam lobes, not to the points. After setting the gap, check ignition timing with a timing light and correct it if needed. Recheck the gap after the first drive, as the rubbing block can settle into the cam.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17243.01 |
| UPC | 804314016364 |
| Part type | Distributor point set |
| Engine | 4 cylinder 134 |
| Warranty | Five year limited warranty. |
Vehicle fitment
It fits the 1959–1960 Jeep CJ3 (Base), the 1959–1960 and 1968–1971 Jeep CJ5 and CJ6 (Base), and a range of Willys 1-Ton, 463, 473, Panel, Sedan Delivery, Truck and Utility Wagon models from 1946 to 1955, plus the Willys MB from 1941 to 1942.
Jeep CJ7 and Wrangler models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After fitting the point set, check the points gap and ignition timing, because the gap changes as the rubbing block wears.
What’s included
The point set is the item described. No condenser or hardware is named.









