Overview
The Crown Automotive J3204585 is a distributor condenser, a capacitor that works with the breaker points inside an older ignition distributor. It is for 4 cylinder 134 F-Head engines and is the condenser only, not the points set.
It fits early Jeep CJ3, CJ5, CJ5A, CJ6, CJ6A, Jeepster and FC170 models, along with Willys CJ-2, CJ-3, CJ-5, CJ-6 and MB vehicles from 1941 to 1971, depending on the model year.
Key features
- Condenser for breaker-point ignition distributors
- It is for 4 cylinder 134 F-Head engines.
- It fits early CJ and Jeepster models.
- Crown Automotive part number J3204585
Condenser and points working together
The condenser sits across the breaker points and absorbs the voltage spike that forms when the points open. This protects the contacts from burning and helps the coil produce a strong spark. When a condenser weakens, points burn or pit faster, the engine can run rough, and starting may become difficult, particularly in warm weather.
Replacing a condenser makes the most sense alongside a new points set, or when the existing points show pitting or a dull, burned surface. Check the mounting and make sure the lead is secure, then set the points gap and timing after the change. Keep the distributor clean and dry, since moisture and oil on the contacts shorten the life of both parts.
- Pitted or burned points contact faces
- Hard starting when the engine is warm
- Weak spark or misfire at higher engine speed
- Loose or corroded condenser lead
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3204585 |
| UPC | 848399059144 |
| Part type | Distributor condenser |
| Engine | 4 cylinder 134 F-Head |
Vehicle fitment
It fits the 1959–1960 Jeep CJ3 (Base), 1959–1971 Jeep CJ5 and CJ6 (Base), 1966–1968 Jeep CJ5A and CJ6A (Base), 1957–1961 Jeep FC170 (Base), 1966–1971 Jeep Jeepster (Commando) and several Willys models from 1941 to 1958. CJ7 and Wrangler models are not covered. Confirm the year, model and trim of your vehicle before ordering.
CJ7 and Wrangler models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A condenser is connected in parallel with the breaker points, so the points gap and ignition timing should be checked after the condenser is changed. Disconnect the battery before working inside the distributor.
What’s included
One distributor condenser is described. The breaker points set is not included.









