Overview
The Omix-ADA DMC-6914 is a coated aluminum valve cover kit for 4.2L engines that replaces the factory plastic cover. The manufacturer fitment list names the 1984–1986 Jeep Cherokee (XJ), the 1986 Jeep Comanche and the 1984–1986 Jeep Wagoneer (SJ).
The finish is a black powder coat, and the cover is listed in OE replacement style.
Key features
- Built for 4.2L engines
- Aluminum body with black powder coat
- Replaces the factory plastic valve cover
- OE replacement style
Planning the drilling step
Drilling a valve cover is a step that many installers underestimate. Mark each hole location using the new cover as a template, and use a center punch before drilling so the bit does not wander on the aluminum surface. A slow speed with cutting fluid keeps the metal from work hardening and helps produce clean holes that line up with the head.
After drilling, remove burrs from each hole and clear every metal chip from the cover and the top of the engine. Loose filings can fall into the oil passages or onto the valve train. Check the cover fit against the head before applying any gasket or sealant, and make sure the hardware clears the edges of the cover on both sides of the engine.
- Mask the coating around each drill point
- Deburr holes with a countersink or hand tool
- Confirm clearance for the oil filler and dipstick
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | DMC-6914 |
| UPC | 804314070168 |
| Style | OE Replacement |
| Finish | Coated, black powder coat |
| Material | Aluminum |
| Engine | 4.2L |
| Installation requirement | Drilling required |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the Jeep Cherokee (XJ) 1984–1986 with Base, Chief, Laredo and Pioneer trims, the Jeep Comanche 1986 with Custom, X and XLS trims, and the Jeep Wagoneer (SJ) 1984–1986 with Base and Limited trims.
Other years and models are not covered, including Cherokee models outside the XJ generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required for this kit. Plan for that step and its tools before you begin, and confirm the engine is the 4.2L application first.
What’s included
The kit contains the aluminum cover. Confirm what the kit contains against your installation plan before you start.









