Overview
The N-Fab N/FT1464R is a wheel to wheel nerf step in gloss black for the 2014–2024 Toyota 4Runner, covering the Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Trail and Venture trims. Side steps of this type are tubular bars that provide a raised step into the vehicle and protect the lower body along the rocker area.
N-Fab describes its line as heavy duty, high end tubular parts for trucks and SUVs dating back to the 80s. The steps use .084 wall steel in a single all welded piece, carry zinc coating under a thick powder-coat finish that N-Fab calls high gloss, and are listed here in gloss black.
Key features
- Wheel to wheel length
- .084 wall steel tubing
- One piece, all welded construction
- Zinc coated for corrosion protection
- High gloss powder-coat finish.
- Gloss black color
- Direct fit for the 4Runner trims it covers.
Gloss finish care
A gloss black finish shows fine scratches and water spots more clearly than a matte one, so regular washing matters more. Use a soft cloth and mild soap, and dry the surface to avoid spotting. Avoid abrasive pads, which can dull the high gloss look over time and expose the steel to moisture.
On a 4Runner, the step sits low on the body, so it collects road grime and grit near the rocker. Clean the mounting areas along with the bar, and look for loose bolts after rough trips. Any chip that reaches bare steel should be touched up right away. If you add off-road tires or a lift, recheck clearance and the step position. Walk around the bar before long trips to check for damage.
Specifications
| Brand | N-Fab |
|---|---|
| Part number | N/FT1464R |
| Finish | Gloss Black |
| Length | Wheel to Wheel |
| Fitment type | Direct Fit |
| Material | Steel |
| Wall thickness | .084 wall |
| Construction | All welded, one piece |
| Corrosion protection | Zinc coat |
| Coating | Thick powder coat, high gloss |
Vehicle fitment
It covers the 2014–2024 Toyota 4Runner in Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Trail and Venture trims, and it is a direct fit.
The 4Runner is the only model on that list, so the Toyota Sequoia and other models are not covered by it. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check for brackets, bolts and other mounting parts in the box before you start.











