Select your vehicle

N-Fab Wheel To Wheel Nerf Steps (Textured Black) – T0589CC-TX

N-Fab

Shop Toyota Tacoma Nerf Steps on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2005–2015 Toyota Tacoma in Base and Pre Runner trims per the manufacturer list
  • N-Fab part number N/FT0589CC-TX with a Textured/Matte Black finish
  • Measures wheel to wheel, built from .084 wall steel
  • Fully welded one piece build with a zinc coat underneath

Description

Overview

The N-Fab Wheel To Wheel Nerf Steps in Textured Black, part number N/FT0589CC-TX, are wheel-to-wheel nerf bars with step tubes for the 2005–2015 Toyota Tacoma in Base and Pre Runner trims. Nerf bars, also known as side steps, raise the entry height to the cab and run along the lower body below the doors.

The bar is made from .084 wall steel, fully welded as one piece. Zinc coating goes on before the powder-coat, which is applied in a thick layer for durability. The finish is textured matte black, and the length runs wheel to wheel.

Key features

  • Full wheel-to-wheel length for a long step along the side
  • .084 wall steel tubing
  • Fully welded, one piece construction
  • Zinc coated for corrosion protection
  • Thick powder-coat finish in Textured/Matte Black
  • Direct fit listing for the 2005–2015 Toyota Tacoma Base and Pre Runner trims

Tacoma generation and nerf bar fit

Wheel-to-wheel bars cover the full span between the wheels, so they add a long step line along the side of the truck. Because the bar sits under the doors, it can be the first part to catch on rocks, rut edges and brush. Before fitting, check the ground clearance you want to keep, and decide whether a skid plate or rock rail is needed for your terrain.

Tacoma generations differ in body mounting and frame geometry, so mounting points for one generation may not carry over to another. Confirm the body style and trim against your truck before fitting, and inspect the factory mount points for rust before drilling or bolting anything. Touch up powder-coat chips early so the steel stays protected.

  • Check ground clearance and rock exposure
  • Inspect factory mount points for rust
  • Touch up chips at the bar ends

Specifications

Brand N-Fab
Part number N/FT0589CC-TX
Finish Textured/Matte Black
Length Wheel to wheel
Material Steel, .084 wall
Construction Fully welded, one piece
Corrosion protection Zinc coat
Fitment type Direct Fit

Vehicle fitment

It fits the 2005–2015 Toyota Tacoma in Base and Pre Runner trims.

Tacoma models from 2016 onward and the Tundra are not in this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Supplied as a single run of wheel-to-wheel nerf step tubing with a textured black powder-coat.

Not included: Mounting brackets, bolts and other hardware should be confirmed for your truck before installation.

SKU: N/FT0589CC-TX Categories: , ,

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2015Base, Pre Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is N-Fab part number N/FT0589CC-TX?

N/FT0589CC-TX is the N-Fab part number for the Wheel To Wheel Nerf Steps in Textured Black. It is a wheel-to-wheel nerf bar for the 2005–2015 Toyota Tacoma Base and Pre Runner trims. Confirm fit for your vehicle's year, model and trim before ordering.

Does this part fit a 2016 or newer Tacoma?

No, the manufacturer list covers 2005 through 2015 Toyota Tacoma models only, so later Tacoma years are not included. Check your year and trim against the list before ordering.

What gauge steel is used on this bar?

The bar is made from .084 wall steel and welded as one piece. Zinc coating goes on first, and a thick powder-coat finish in Textured/Matte Black goes on top for durability.

Are bolts and brackets part of the kit?

Check the package contents for bolts, brackets and other mounting hardware before you start. Plan the install around the bar itself and the hardware you receive.

How does a wheel-to-wheel bar differ from a shorter step?

A wheel-to-wheel bar runs the full distance between the wheels, giving a continuous step line and more coverage along the side. Shorter steps leave more ground clearance at the ends. Pick the length that matches how you climb in and where you drive.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Nerf Steps on Amazon