Overview
The N-Fab R.S.P. Front Bumper in Gloss Black, part number C144RSP, is a full replacement front bumper for the 2014–2015 Chevrolet Silverado 1500. It replaces the lower metal section of the factory bumper and comes with a 3/16 inch aluminum skid plate.
The bumper uses .095 wall tubing with a gloss black powder coat, bolts directly to the factory bumper mount on the frame horns and can mount up to four 9 inch lights. It is made in the U.S.A.
Key features
- Replaces the lower metal section of the factory bumper
- 3/16 inch aluminum skid plate included
- All bolt-on design that N-Fab says will not flex
- Bolts directly to the factory mount on the frame horns
- Uses .095 wall tubing
- Mounts up to four 9 inch lights
- Lifetime warranty on the product and 5 year warranty on the finish
Skid plates and bumper protection
A skid plate guards the lower front of the truck against rocks, stumps and ledges. It sits below the bumper and protects parts such as the oil pan, steering components and transfer case from direct impact. Because it is the part most likely to hit the ground, it should be checked often for bent edges and scraped coating.
Ground clearance is the trade-off. A skid plate lowers the front edge slightly, so check how the truck sits against obstacles before heading off road. Aluminum plates are lighter than steel and tend to dent rather than tear, which many off-road drivers prefer for trail use. Keep the plate bolts snug and use fresh threadlocker on fasteners that vibrate loose.
- Inspect the skid plate after each rocky trail
- Look for cracked welds and loose brackets
- Clean mud from the plate to spot damage early
Specifications
| Brand | N-Fab |
|---|---|
| Part number | C144RSP |
| UPC | 843206102945 |
| Product type | Full replacement front bumper |
| Series | R.S.P. |
| Material | Steel tubing, .095 wall |
| Finish | Gloss black powder coat |
| Skid plate | 3/16 inch aluminum, included |
| Light mounts | Included, up to four 9 inch lights |
| Winch mount | Not included |
| D-ring mount | Not included |
| Width | Mid |
| Position | Front |
| Warranty | Lifetime on the product; 5 year on the finish |
| Origin | Made in the U.S.A. |
Vehicle fitment
It fits the 2014–2015 Chevrolet Silverado 1500.
Verify your Silverado’s year and trim before you order, especially for 2016 and later Silverado 1500 models and the Silverado HD trucks.
Installation notes
The bumper bolts directly to the factory bumper mount on the frame horns.
What’s included
The bumper and the 3/16 inch aluminum skid plate.
Not included: lights and a winch mount.









