Overview
The Road Armor 314R4Z is a Stealth series winch front bumper for the 2014–2015 Chevrolet Silverado 1500. It is unfinished raw steel with square light mounts and a Pre-Runner guard.
It works with factory front sensors. The winch mount houses up to a 12k non-integrated winch, and recessed pods take Square Rigid Dually/D2 Series or Vision-X Optimus Series lights. The plate is hot rolled and laser cut 3/16 inch steel.
Key features
- Pre-Runner guard with square light mounts
- Recessed pods for Square Rigid Dually/D2 or Vision-X Optimus Series lights
- Winch mount for up to a 12k non-integrated winch
- Works with factory front sensors
- Hot rolled and laser cut 3/16 inch plate steel
- Fully welded front and back shackle mounts
- Faceted outer shell with 1/4-inch-thick internal brackets and gussets
- The bumper carries a lifetime guarantee against breakage.
Mounting a winch bumper
A winch bumper adds weight at the front of the truck, which changes load on the springs, shocks, steering and the front brakes. The mounting points and bolts carry most of that load, so they should be checked before and after the first heavy use. A bumper with a winch mount is often paired with a recovery strap, shackles and a fused power feed sized for the winch.
Bare steel rusts quickly once it is exposed to moisture, so a primer and topcoat should be applied soon after fitting. Front parking sensors and any camera mounted in the bumper area may need to be checked for proper function after installation, since the new shape can change the sensor angle.
- Confirm the winch weight and mounting bolt torque
- Wire the winch and lights to a fused circuit
- Check sensor function after installation
- Prime and coat bare steel promptly
Specifications
| Brand | Road Armor |
|---|---|
| Part number | 314R4Z |
| UPC | 811873022576 |
| Series | Stealth |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Bare (unfinished raw steel) |
| Guard | Pre-Runner, square light mounts |
| Light mounts | Included |
| Winch mount | Included, up to 12k non-integrated winch |
| D-ring mount | Included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2014–2015 Chevrolet Silverado 1500.
It does not cover Silverado 2500 HD or 3500 HD, or Silverado 1500 model years outside 2014–2015. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The steel is bare, so finishing is up to the owner. The winch and lights are separate.
What’s included
- Front bumper with Pre-Runner guard
- Winch mount
- Light mounts
- D-ring mount
Not included: Winch and lights.









