Select your vehicle

N-FAB RSP Replacement Front Bumper in Gloss Black (Textured) – C084RSP

Nfab

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • N-Fab RSP replacement front bumper for the 2007–2014 Chevrolet Silverado 2500 HD and 3500 HD
  • Gloss black powder coat on .095 wall tubing
  • Mounts up to four 9 inch lights
  • Lifetime warranty on the product, 5 year on the finish

Description

Overview

The N-Fab RSP Replacement Front Bumper in Gloss Black, part number C084RSP, is a full-width front bumper for the 2007–2010 and 2012–2014 Chevrolet Silverado 2500 HD and 3500 HD. It is made in the U.S.A. and bolts on in a design N-Fab says will not flex.

The tubular bumper is built from .095 wall tubing with a gloss black powder coat and mounts up to four 9 inch lights. It uses all-welded one-piece construction, and each part is zinc coated for corrosion protection.

N-Fab has made nerf bars, pre-runners and other off-road accessories as heavy-duty tubular parts for trucks and SUVs since the 80s. The bumper has a thick high-gloss powder coat finish over a zinc coat.

Key features

  • Replacement front bumper, full width
  • All bolt-on design that N-Fab says will not flex
  • Uses .095 wall tubing
  • Mounts up to four 9 inch lights
  • Gloss black powder coat
  • Made in the U.S.A.
  • Lifetime warranty on the product and 5 year warranty on the finish

Choosing lights and mounts

A front bumper is often the first place to add off-road lights, and mounting them changes how the bumper is used. Light bars add weight and can catch mud and branches, so the mounts should be solid and the lights aimed low enough to avoid glare. Before drilling or adding brackets, decide how many lights you want and where the wiring will run.

Plan the wiring as part of the install. A relay and fuse close to the battery protect the circuit, and the harness should be routed away from moving parts, the winch area and the bumper’s edges. Use sealed connectors where moisture or mud can reach them, and leave some slack so bumps do not pull the wire loose.

  • Check mount hardware after rough trail use
  • Keep harnesses away from exhaust and heat sources
  • Aim lights before long drives, then recheck them

Specifications

Brand N-Fab
Part number C084RSP
UPC 843206102259
Product type Replacement front bumper
Series RSP
Material Steel tubing, .095 wall
Finish Textured gloss black powder coat
Light mounts Included, up to four 9 inch lights
Winch mount Not included
D-ring mount Not included
Position Front
Warranty Lifetime on the product; 5 year on the finish
Origin Made in the U.S.A.
Fit type Direct fit

Vehicle fitment

It fits the 2007–2010 and 2012–2014 Chevrolet Silverado 2500 HD and 3500 HD.

The 2011 model year and the Silverado 1500 are not in the listed fitment. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The bumper with light mounting provisions. Lights are not included, and neither is a winch mount.

SKU: N/FC084RSP Category:

Specification

Shipping weight 125.00 lbs
Package dimensions 82.00 × 31.00 × 28.00 in
brands

Fitment

VehicleYearsTrims
Chevrolet Silverado 2500 HD2007–2010, 2012–2014LT, LTZ, WT
Chevrolet Silverado 3500 HD2007–2010, 2012–2014LT, LTZ, WT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What trucks does the N-Fab C084RSP fit?

The C084RSP fits the Chevrolet Silverado 2500 HD and 3500 HD in 2007–2010 and 2012–2014. Before ordering, make sure your vehicle's year, model and trim match the fit above.

How many lights can the C084RSP mount?

The bumper mounts up to four 9 inch lights. Lights are not included, and the bumper includes the light mounts for them.

Does the C084RSP have a winch mount?

No. A winch mount is not included with the C084RSP. It does include light mounts and has an all bolt-on design.

How should powder coat on a bumper be cared for?

Wash it with mild soap and water and dry it to prevent water spots. Touch up chips with matching touch-up coating before rust starts, and avoid harsh solvents on the finish. Check the mounting bolts after rough trail use, since vibration can loosen them over time.

Is a winch mount needed to use this bumper?

No. A winch mount is not included with the C084RSP, so it is only needed if you plan to add a winch. Light mounts are included and can be used without a winch. Plan any winch mounting and load path before installing the bumper.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon