Select your vehicle

N-FAB Roof Mounted Light Brackets – T0749LR-TX

Nfab

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Lists the 2007–2018 Toyota Tundra in 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims
  • Textured black side mount roof bracket, part T0749LR-TX
  • Welded one-piece steel with zinc coat
  • Direct fit designation

Description

Overview

The N-Fab T0749LR-TX is a textured black side mount roof light bracket. It fits the 2007–2018 Toyota Tundra in 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims as a direct fit.

The bracket is made from .084 wall steel with a welded one-piece build. N-Fab zinc coats the part and applies a high gloss powder coat, giving the textured black finish a hard, corrosion resistant base.

Key features

  • Roof mounted bracket for light bars
  • Side mount design
  • Textured black finish
  • Welded one-piece steel construction
  • Zinc coated underneath the powder coat
  • Direct fit designation for listed Tundra trims

Tundra roof brackets in daily use

A side mount bracket carries the light bar away from the bumper, so the bar is fed by the roof edge and exposed to wind, snow and car washes. Inspect the welds and bolts after heavy weather, and keep the textured black finish touched up where stones have chipped it. Zinc under the powder coat helps resist rust, but it does not stop rust once the coating is broken.

When choosing a light bar to pair with a bracket, match the bar’s mounting pattern and weight to the bracket rather than the reverse. Consider a fused relay and a switch within easy reach, and plan the cable run before drilling any holes in the roof. Replace worn grommets and clips as they age so the harness stays protected.

Specifications

Brand Nfab
Part number T0749LR-TX
UPC 843206118946
Mount style Side mount, roof mounted
Finish Textured black
Fitment type Direct fit
Material Steel, .084 wall
Construction Welded, one-piece
Corrosion protection Zinc coat

Vehicle fitment

It fits the 2007–2018 Toyota Tundra in 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.

Models from 2019 onward and other Toyota vehicles fall outside this fit. Confirm your model year and trim before you buy.

What’s included

The bracket. Compare the box contents with the installation steps before starting.

Not included: A light bar, which the side mount bracket is made to carry.

SKU: N/FT0749LR-TX Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 16.00 × 5.00 × 5.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tundra2007–20181794 Edition, Base, Limited, Platinum, SR, SR5, TRD Pro

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the T0749LR-TX fit a 2019 Toyota Tundra?

It fits the 2007–2018 Tundra trims named above, so a 2019 or later model is outside that range. Confirm your model year and trim before ordering.

Is the T0749LR-TX the same part as the T0749LR?

They are separate part numbers. The T0749LR-TX is textured black and fits Tundra trims, while the T0749LR is sold with no vehicle named, so check fit for each before buying.

What material and finish does this bracket use?

It is textured black, made from .084 wall steel in a welded one-piece build. The steel is zinc coated and finished with a powder coat, giving corrosion protection under the finish.

How do I tell if a roof bracket needs replacing?

Look for cracks at the welds, bent arms, loose bolts that will not hold tight, or rust that spreads under the powder coat. Any of these means the bracket should be inspected or replaced before carrying a light bar again.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon