Overview
The N-Fab F993LH is a Pre-Runner light bar with three light tabs, finished in black powder coat and built as a welded one piece tube. It is a Direct Fit front bar and is body lift compatible. Before ordering, confirm the year, model and trim against your truck or SUV.
Pre-runner light bars mount at the front of a truck or SUV and carry auxiliary lights for trail use. The F993LH uses .084 wall steel, which N-Fab describes as heavier gauge, and each part is zinc coated before a high gloss powder coat is applied. N-Fab says its tubular parts are built for many trucks and SUVs, dating back to the 80s, and presents this bar as heavy duty.
Key features
- Welded one piece construction
- Three light tabs for auxiliary lights
- Body lift compatible
- .084 wall steel tubing, zinc coated
- High gloss black powder coat finish
- Direct Fit front mounting.
Mounting position and clearance
A Direct Fit front pre-runner bar mounts where the front of the truck or SUV meets the bumper or grille. Its position decides how far the lights reach and how well they clear the hood. Check the mounting points before drilling anything, and make sure the bar sits square and does not rub on the grille or lift hardware.
Body lift compatible bars need extra attention. When the body sits higher, the gap to the bar changes, and the wiring may need more slack. Plan the wiring route so it has room to move with the body and stays clear of the hood latch and steering parts.
The steel tube with a powder coat holds up well when the finish stays intact. Touch up chips promptly and wash off road salt, which can speed corrosion where the coating is thin.
- Check the grille gap before final mounting
- Leave slack in the wiring
- Touch up coating chips quickly
Specifications
| Brand | Nfab |
|---|---|
| Part number | F993LH |
| UPC | 843206112425 |
| Product type | Pre-Runner light bar |
| Finish | Black powder coated, high gloss |
| Construction | Welded one piece |
| Bar diameter | 1.5 |
| Light tabs | 3 |
| Steel | .084 wall steel |
| Corrosion protection | Zinc coated before powder coating |
| Body lift compatibility | Yes |
| Mounting | Direct Fit front |
Vehicle fitment
It is a Direct Fit front bar. Check the mounting position against each truck or SUV you plan to fit it to.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because body lift compatibility is listed, check that the bar’s mounting position clears your lifted body before installing it. Wire any lights on the bar through a fused relay and check local rules on auxiliary lighting before using them on public roads.
What’s included
Lights, brackets and wiring are not part of the bar itself, so check the package contents against your installation before starting.
Not included: Plan to source auxiliary lights, mounting brackets and wiring separately.








