Overview
The Nfab C063LB is a black powder coated light bar with four light tabs for mounting auxiliary off-road lights. It is a Direct Fit front light bar, designed to mount at the front of a truck or SUV. Vehicle years, makes and models are not covered here, so confirm fit before ordering.
N-Fab is known for nerf bars, pre-runners and other off-road tubular accessories. This light bar follows the same approach: a heavy duty, one piece steel tube that holds lights in a fixed position. It uses heavier gauge tubing with an all welded build, zinc coated for corrosion protection and finished in a thick high gloss powder coat.
Key features
- All welded, one piece construction
- 1.5 in bar diameter tubing
- Four light tabs for mounting auxiliary lights
- .084 wall steel tubing, which N-Fab describes as heavier gauge
- Zinc coated before finishing for corrosion protection
- High gloss black powder coat finish
- Made in the USA
Mounting a front light bar
A front light bar carries lights where air and debris hit first. Fixed tubular bars like this one hold the lights in one position, which makes aim easier to keep over time. Mounting it on the front end changes the weight balance, so think about how the bar will sit once lights are added.
Steel tube with a powder coat holds up well to scrapes, but the finish can chip at the edges. Touch up any chips soon to limit rust under the coating. Use clean fasteners and anti-seize where the bar meets the mounts, and check that connections stay tight after rough trails.
Route light wiring through a fuse and relay, and keep it away from hot exhaust parts and moving suspension. Aim the lights before each trip and check that they do not blind oncoming drivers.
- Touch up chips in the powder coat promptly
- Use anti-seize on fasteners
- Check aim before each trip
Specifications
| Brand | Nfab |
|---|---|
| Part number | C063LB |
| UPC | 843206101221 |
| Product type | Light bar |
| Finish | Black powder coated, high gloss |
| Construction | Welded one piece |
| Bar diameter | 1.5 in tube |
| Light tabs | 4 |
| Steel | .084 wall steel |
| Corrosion protection | Zinc coated before powder coating |
| Country of manufacture | USA |
Vehicle fitment
It is designed as a Direct Fit front bar. Make sure the year, model and trim match your truck or SUV, and check the mounting position against your front end.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the mounting hardware against your front end before installing. Wire any lights on the bar through a fused relay rather than directly from the battery, and check local rules on auxiliary lighting before using the lights on public roads.
What’s included
The bar has four light tabs. Check the package contents against your installation before starting.
Not included: Plan to source auxiliary lights, mounting brackets and wiring separately.













