Overview
The N-Fab Podium LG cab length steps in Textured Black, part number N/FHPD0973QC-TX, are side steps for the Dodge Ram 1500 and Ram 1500 pickups. They fit 2009–2010 Dodge Ram 1500 trims including Laramie, SLT, ST, Sport, TRX and TRX4, and 2011–2015 Ram 1500 trims including Big Horn, Express, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, SLT, ST, Sport and Tradesman.
Nerf steps, also called running boards or side bars, give a step up into a cab-length pickup. N-Fab uses heavier gauge .084 wall steel in an all-welded one-piece build, then zinc coats each part for corrosion protection before a powder-coat finish. The steps are listed with a Textured/Matte Black finish.
Key features
- All-welded one-piece steel construction
- .084 wall steel tubing
- Zinc coated before finishing for corrosion protection
- Powder-coat finish in Textured/Matte Black
- Cab length design
Finish care and rust prevention
Cab length steps spend much of their life close to the road, where splash, grit and road salt collect on the lower body. Zinc coating under the powder finish helps protect the steel where chips can appear, but regular cleaning still matters. Rinse the steps after winter driving and wash the underside when conditions allow.
Textured black powder coat hides dirt well but can chip at the edges and welds. Touch up small chips early with a matching coating to keep bare steel from exposure. Inspect the mounting brackets and the step plate for loose fasteners or cracks, since movement in the bracket can wear the finish faster.
When choosing steps for a pickup used off-road, consider how often you climb in and how much weight the bars will see. Heavier daily use favors sturdy mounts and frequent checks, while occasional road use needs less attention.
- Rinse road salt off after winter driving
- Touch up chips before bare steel shows
- Check brackets for movement each season
- Look for cracks at the welds
Specifications
| Brand | N-Fab |
|---|---|
| Part number | N/FHPD0973QC-TX |
| Wall thickness | .084 |
| Material | Steel |
| Coating | Zinc coated, then powder coat |
| Finish | Textured/Matte Black |
| Length | Cab Length |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for 2009–2010 and 2011–2015 Ram 1500 trims, as shown above.
Ram 1500 model years outside 2009–2015 and Ram 2500 or 3500 trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Hardware for installation is not confirmed. Confirm the package contents before the install starts.









