Select your vehicle

N-Fab 2 Inch Nerf Steps (Textured Black) – T1690CC-6-TX

N-Fab

$403.70In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 9:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2016–2023 Toyota Tacoma SR, SR5, TRD Off-Road and TRD Sport, per fitment list
  • Part number T1690CC-6-TX, textured/matte black finish
  • 2 inch nerf steps with .084 wall steel tube
  • All-welded, zinc coated, wheel-to-wheel length

Description

Overview

The N-Fab 2 Inch Nerf Steps in textured black, part number T1690CC-6-TX, are wheel-to-wheel nerf bars for four 2016–2023 Toyota Tacoma trims: SR, SR5, TRD Off-Road and TRD Sport. The textured, matte black finish is what sets this version apart from the gloss black N-Fab bars.

N-Fab, a maker of nerf bars and pre-runner accessories, builds the tube from .084 wall steel and welds each part as one piece. The steel is zinc coated before the finish is applied, which N-Fab says protects it from corrosion. The textured black coating gives a non-glossy look while keeping the same tubular profile.

Owners of an SR, SR5, TRD Off-Road or TRD Sport Tacoma who want a textured look on a 2 inch bar can compare the specifications below. The bar is listed only for those trims, so confirm the trim before choosing this finish.

Key features

  • Textured/matte black finish instead of gloss
  • 2 inch tubular nerf bar profile
  • Heavier gauge .084 wall steel tube
  • All-welded, one-piece construction
  • Zinc coated for corrosion protection
  • Wheel-to-wheel length

Textured finish and upkeep

A nerf bar takes most of the impact from curbs, brush and gravel, so the finish is often the first thing to show wear. A matte textured coating hides fine scratches and road grime better than gloss, but it still needs regular cleaning. Use a mild soap and a soft brush, and avoid harsh solvents that can dull the surface over time.

Check the mounting points after the first few trail runs and again each season. Look for loose fasteners, bent brackets and chips that expose bare metal, since a small chip is easier to touch up early. Touch-up paint designed for the coating is a practical way to keep corrosion from starting at exposed spots.

If you plan to add a rock slider or a different bumper later, confirm how the bar’s mounting points will share space with those parts before ordering. Related parts such as hardware and rubber isolators are often replaced when a bar is removed and refitted.

Specifications

Brand N-Fab
Part number T1690CC-6-TX
Finish Textured/Matte Black
Tube 2 inch, .084 wall steel
Construction All-welded, one-piece
Corrosion protection Zinc coat
Length Wheel to wheel
Fitment Direct fit

Vehicle fitment

It fits the 2016–2023 Toyota Tacoma in the SR, SR5, TRD Off-Road and TRD Sport trims.

Limited, TRD Pro and Trail trims are not in this list, and Tacoma model years before 2016 are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

It is a direct fit. Check the package contents against your installation before starting the job.

What’s included

Check the package contents against your installation before starting.

SKU: N/FT1690CC-6-TX Categories: , ,

Fitment

VehicleYearsTrims
Toyota Tacoma2016–2023SR, SR5, TRD Off-Road, TRD Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the T1690CC-6-TX made for every 2016–2023 Tacoma?

No. It fits the 2016–2023 Toyota Tacoma SR, SR5, TRD Off-Road and TRD Sport trims. Confirm fit for your vehicle's year, model and trim before ordering.

How does the textured black finish differ from gloss black?

The finish is textured/matte black instead of gloss black. The steel tube, all-welded one-piece build and zinc coating are described the same way across the N-Fab bars in this range.

Are the bars zinc coated?

Yes. N-Fab says each part is zinc coated for better corrosion protection before the finish is applied, so the zinc layer sits under the textured black coating.

Are mounting brackets included?

Check the package contents against your installation before starting. Confirm fit for your vehicle's year, model and trim before ordering.

How should I clean a textured black nerf bar?

Rinse off mud and salt, then wash with mild soap and a soft brush. Avoid abrasive pads and strong solvents, since they can wear down a textured coating. Dry the bar and inspect the fasteners after cleaning.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon