Overview
The MSD 8849 is a spark plug boot and terminal kit that lets you change the style of your spark plug wires. It is useful when off-the-shelf wire kits do not provide the clearance or custom routing your engine needs.
It is designed for universal use, so it is not built for one specific vehicle. Check clearance around your engine and headers before you assemble and install the wires.
Key features
- Boot and terminal kit for changing spark plug wire style
- Supports custom wire routing where standard kits fall short
- Helps gain clearance in tight engine bays
Building wires with custom boots
A boot and terminal kit is a way to rebuild the ends of a spark plug wire, so the boot and terminal can be set to the length and angle your engine needs. Measure each run carefully, leaving room for the boot to seat fully on the plug and the terminal to seat on the distributor or coil end. Cut the wire squarely so the terminal grips evenly.
Tight engine bays and headers often leave little room for standard wires. Test-fit the assembled wires before the final install and check that the boots do not rub on hot surfaces or sharp edges. Keep the wires away from belts and moving parts.
- Dry fit each wire before final assembly
- Seat the boot fully on the plug end
- Route wires away from exhaust heat
- Check terminal grip after the first run
Specifications
| Brand | MSD |
|---|---|
| Part number | 8849 |
| UPC | 85132088492 |
| Type | Spark plug boot and terminal kit |
| Fitment | Universal fit |
Vehicle fitment
Fit depends on wire length, terminal style and engine layout, since the kit is universal.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit provides the boot and terminal components for building the wires. Check the package contents against your installation before starting.
Not included: spark plug wire cable, which is needed to build the boot and terminal onto.









