Overview
The Mr. Gasket Company 1986 High Performance Electric Cooling Fan is a 12 inch pusher/puller fan with straight blades. It is designed to be used as an auxiliary cooling fan, mounted in front of an A/C condenser or radiator.
The fan moves 1400 cfm at 2300 RPM and draws 10.2 amps. It is labeled Universal Fit, with no specific vehicle, year, model or trim named.
Key features
- 12 inch diameter high performance electric fan
- 1400 cfm airflow
- 2300 RPM
- 10.2 amp draw
- Designed for use as an auxiliary cooling fan
- Mounts in front of an A/C condenser or radiator
Auxiliary fan wiring and placement
An auxiliary fan works alongside the main cooling system, typically turning on when the air conditioner or engine temperature calls for extra airflow. Because it draws a steady current, the power feed should be fused and often switched through a relay so the switch does not carry the full load. Keep the fan away from belts and pulleys.
Check the fan’s position relative to the A/C condenser. Airflow should pass through the condenser and radiator in the direction the cooling system was designed for. Look for debris buildup on the blades, and check the wiring insulation where it passes near hot exhaust or sharp edges. A pusher/puller fan with straight blades can be checked by turning it by hand with power off.
Specifications
| Brand | Mr. Gasket Company |
|---|---|
| Part number | 1986 |
| UPC | 84041019863 |
| Fan diameter | 12 inch |
| Blade style | Straight blade |
| Fan type | Pusher/Puller |
| Fan style | Single |
| Airflow | 1400 cfm |
| Speed | 2300 RPM |
| Current draw | 10.2 amps |
| Use | Auxiliary cooling fan |
| Fitment label | Universal Fit |
Vehicle fitment
The fan is labeled Universal Fit and no vehicle, year, model or trim is named. Fit depends on the space in front of your condenser or radiator, so measure that space and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the fan is intended as an auxiliary fan, it mounts in front of the A/C condenser or radiator. Its 10.2 amp draw means the power feed should be fused and, in most builds, relay-switched. Keep the fan clear of moving engine parts.
What’s included
Check the package contents against your installation before starting, including the mounting hardware and wiring you will need.
