Overview
The Mishimoto Transmission Fluid Cooler, part number MMTC-TF-2075, is a universal transmission fluid cooler with a 20 x 7.5 x 0.75 in tube-and-fin core and 3/8 inch push-on fittings. It comes as a kit and works with transmission fluid, engine oil, power steering fluid and other automotive fluids.
This cooler can replace a damaged factory cooler or upgrade a vehicle that has no liquid-to-air cooler. Because the design is universal, it is not tied to a particular make or model.
Key features
- Tube-and-fin core that Mishimoto says lowers fluid temperatures
- Works with transmission fluid, engine oil and power steering fluid
- Universal mounting kit allows flexible placement
- Covered by the Mishimoto Lifetime Warranty.
Mounting and hose routing
Mounting a universal cooler comes down to finding a spot with clear airflow and enough space for the core. Common choices are in front of the radiator or in the lower grille opening, where moving air can reach the fins. Keep the core away from hot exhaust and moving parts, and leave room for the push-on fittings to bend without kinking the hose.
Hose routing and fluid compatibility deserve attention. Route lines with gentle curves, secure them with the included worm-gear clamps, and check that the hose clears steering, suspension and body edges through the full range of movement. Confirm the fluid type before connecting, since a cooler is only one part of the job.
- Measure the core footprint against the mounting area
- Use fresh clamps when refitting a used hose
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | MMTC-TF-2075 |
| UPC | 748354011692 |
| Core dimensions | 20 x 7.5 x 0.75 in |
| Core type | Tube-and-fin |
| Fittings | 3/8 inch push-on |
| Hose | 5 ft rubber |
| Clamps | Four worm-gear |
| Fluids | Transmission fluid, engine oil, power steering fluid |
| Fitment type | Universal fit |
| Warranty | Lifetime |
Vehicle fitment
It is a universal fit, so measure mounting space and check clearance and hose routing for your vehicle.
Because it is not vehicle-specific, measure your mounting space and plan the hose routing before choosing this cooler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The universal mounting kit lets you place the cooler to suit your vehicle. Secure the push-on hose connections with the four worm-gear clamps, then check for leaks after installation and before driving.
What’s included
The kit includes the cooler, 5 ft of rubber hose, a universal mounting kit and four worm-gear clamps.











