Overview
The Max-Bilt Valance Armor, part number MAXVAL-R, is a bare steel rear valance for Jeep Wrangler vehicles. It fills the space between the tailgate and the bumper and adds protection to the rear of the Jeep. It fits the 1987–1995 Wrangler (YJ), 1997–2006 Wrangler (TJ) and 2004–2006 Wrangler (LJ, including Unlimited models).
The valance is made from 3/16 inch steel and has two cutouts designed for Rigid flush mount D-Series LED lights. Those lights are sold separately, so they are not included with the armor. Hardware for installation is included, and the armor requires drilling.
Key features
- 3/16 inch steel construction
- Bare steel finish
- Two cutouts for Rigid flush mount D-Series LED lights
- Fits between the tailgate and bumper
- Includes all necessary hardware for installation
Planning the install
Because drilling is part of the job, mark every mounting hole with the armor held in place before you cut or drill. Check for fuel lines, wiring, the spare tire and the tailgate hinge area so you do not drill into a component. Test-fit the valance on the vehicle before final tightening so the gap between the tailgate and bumper lines up.
Bare steel rusts once the finish is scratched, so touch up drilled edges and bare spots with a rust-inhibiting primer and paint. Treat the rear end like a bumper that takes road debris, and check fasteners after rough trips. If you add lights, use a fused relay and check the rules that apply to auxiliary lighting where you drive.
- Mark holes with the armor in place
- Check fuel lines and wiring before drilling
- Touch up scratches to prevent rust
- Use a fused relay for added lights
Specifications
| Brand | Max-Bilt |
|---|---|
| Part number | MAXVAL-R |
| UPC | 70000682235 |
| Material | Steel, 3/16 inch |
| Finish | Bare steel |
| LED cutouts | Two, for Rigid flush mount D-Series LED lights (sold separately) |
| Included hardware | All necessary hardware for installation |
Vehicle fitment
It fits three Jeep Wrangler generations: 1987–1995 Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims; 1997–2006 Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims; and 2004–2006 Wrangler (LJ) in Unlimited and Unlimited Rubicon trims.
It does not fit the 2007–2018 Wrangler (JK) or the 2018–2022 Wrangler (JL). Verify your year, model and trim before buying.
Installation notes
Drilling is required, so this valance is not a simple bolt-on. Plan the mounting holes before installing the armor. The LED lights are sold separately; if you add them, wire them through a fused relay and check local rules for auxiliary lighting on public roads.
What’s included
The valance armor includes all necessary hardware for installation.
Not included: Rigid flush mount D-Series LED lights, which are sold separately.












