Overview
The Max-Bilt 7 inch round LED headlight in clear, part number TT75HL, is a universal replacement for 7 inch round headlights. It is sold as a pair, with a die-cast aluminum housing and a polycarbonate lens.
Each light uses 15 x 5 Watt Phillips LEDs and runs from 9-32V DC input. It produces 1800 lumens on low beam at 35 Watt and 3800 lumens on high beam at 75 Watt. The housing has provisions for bracket mounting, and some headlight bucket modifications may be needed. Two and four door models are covered, while JK models need an H13 adapter.
Key features
- 15 x 5 Watt Phillips LEDs in each headlight
- 1800 lumen low beam, 35 Watt
- 3800 lumen high beam, 75 Watt
- Input voltage of 9-32V DC
- Die-cast aluminum housing with polycarbonate lens
- Provisions for bracket mounting
- H4 connector included
Wiring and bucket fit
Turn signal and driving light functions have to be wired by the installer, so plan the circuit before the lights go in. Map which wire serves each function and label the leads before cutting anything. Keep the H4 connector seated fully, and secure the harness so it cannot rub on the housing or the bucket edge.
Bucket modifications are sometimes needed for a clean seat, so trial fit each lamp in its bucket with the wiring loosely attached. Look at the bracket points and the lens clearance against the hood. LED headlights should be aimed after the first drive, since bracket movement can change the beam height.
- Label wires before cutting
- Trial fit with wiring loosely connected
- Secure the harness away from moving parts
- Aim after the first drive
Specifications
| Brand | Max-Bilt |
|---|---|
| Part number | TT75HL |
| Size | 7 inch round |
| Finish | Clear |
| LEDs | 15 x 5 Watt Phillips per headlight |
| Input voltage | 9-32V DC |
| Low beam | 1800 lumen at 35 Watt |
| High beam | 3800 lumen at 75 Watt |
| Housing | Die-cast aluminum |
| Lens | Polycarbonate |
| Connector | H4 included; H13 with anti-flicker sold separately |
| Quantity | Pair |
Vehicle fitment
The headlight is universal fit for 7 inch round headlights, so it is not built for one vehicle. Two and four door models are covered, and JK models need the H13 adapter, part number MBLHF-H13AF. Confirm your vehicle’s year, model and trim before ordering.
No year, make, model or chassis is named as a fitment guarantee for this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Turn signal and driving light functions must be wired by the installer, so plan the wiring before fitting the lights. Test-fit each headlight in its bucket first, since some modifications may be needed for a proper seat.
What’s included
The pair includes two headlights with an H4 connector.
Not included: the H13 connector with anti-flicker is sold separately, and the JK adapter MBLHF-H13AF is a separate part.


















