Overview
The Oracle Lighting High Powered LED Fog Lights (ColorSHIFT), part 5775-333, are fog light housing replacements for 2007–2017 Jeep Wrangler JK vehicles. They also fit 2018 Wrangler JL Rubicon and Sport models. The lights are direct fit with plug-and-play wiring and come as a kit.
The housing is a complete high-powered LED replacement with CREE LEDs, a die-cast housing with corrosion-resistant coating and a hard-coated PMMA lens. It delivers 3,000 raw lumens at 30W with an IP67 rating. The Halo ring comes pre-installed and the bezel is black.
Key features
- ColorSHIFT multi-color lens
- Oracle Halo pre-installed
- High-output CREE LEDs with heavy duty solid state electronics
- Die-cast housing with corrosion-resistant coating
- Hard-coated PMMA lens
- IP67 rating
- Plug-and-play installation; universal adapters for H10, 9145 and 9005 included
Electrical load and housing swaps
Replacing a factory fog light housing with an LED unit changes the electrical load on the circuit, even when the wiring is plug-and-play. The 2.0 amp draw at 12V DC is modest, but it still belongs on a fused relay so the dash switch and factory harness are not carrying it. Confirm the fuse and wire gauge match the load before the first power-up.
The IP67 rating covers dust and temporary immersion, but seals still need care. Clean the lens with mild soap, dry the connector before plugging it in, and add a light coat of dielectric grease on the contacts. Recheck the seal of the housing after water crossings or pressure washing, since a damaged gasket lets moisture in over time.
- Confirm fuse rating and wire gauge before wiring
- Keep the Halo wiring separate from the bulb feed
- Check the OEM mount for cracks before reinstalling
- Aim the housings after every removal
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5775-333 |
| UPC | 577533320153 |
| Bezel color | Black |
| Light input voltage | 9-36V DC |
| Halo input voltage | 12V DC |
| Wattage | 30W |
| Raw lumens | 3,000 lm |
| Width | 120.65 mm |
| Height | 120.65 mm |
| Max depth | 88.9 mm |
| IP rating | IP67 |
| Current draw | 2.0 amps at 12V DC |
| Bulb fitment | H10, 9145, 9005 (universal adapters included) |
| Warranty | 2-year |
Vehicle fitment
Fits 2007–2017 Jeep Wrangler (JK) 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X and X. It also fits 2018 Jeep Wrangler (JL) Rubicon and Sport.
JK models before 2007, TJ and LJ Wranglers, JL models other than 2018 Rubicon and Sport, and 2019 onward are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plug-and-play wiring allows direct installation. The 2.0 amp draw at 12V DC is a load the circuit must carry, so a fused relay is a practical choice. Local road-use rules still apply.
What’s included
A kit with the Halo pre-installed and universal adapters for H10, 9145 and 9005 bulbs.
Not included: Check the package contents against your installation before starting. The mounting type is OEM, so the factory fog light mount is used.









