Overview
The Lange Originals Kwick Kit II hardtop removal kit, part number 020-289, replaces standard hardtop mounting points with quick release hardware. The kit uses 1 & 1/4 turn fasteners that remove easily, and the nut portion of each fastener permanently attaches to the body, so the fastener part is not lost when the top comes off.
To reinstall the top, twist the fasteners down, which holds the top snug. The standard kit requires a pop rivet tool and some drilling for installation. TJ Wrangler kits include four special latches that attach to the rear with no drilling required. This kit will not work on fiberglass bodies.
Key features
- 2 adjustable quick release latches for the windshield frame
- 8 patented 1 & 1/4 turn fasteners
- Nut portions stay permanently attached to the body
- Twist-to-secure reinstallation
- TJ Wrangler version with 4 rear latches and no drilling required
- Complete instructions included
Before removing the top
Removing a hardtop exposes the cab to weather, so plan where the top will rest before you start. Hardtops are heavy and awkward to handle, and a second person makes lifting safer and more controlled. Disconnect any wiring or antenna cable that runs through the roof before the top comes off, and keep the fastener nut portions clean so the quick release turns smoothly each time. Store the removed panel on a padded surface so the finish and seal edges are protected.
Quick release fasteners work best when threads and mounting points are free of grit and corrosion. Wipe them down periodically and check that each latch seats fully when the top goes back on. A top that sits unevenly can squeak, leak at the seal, or put stress on the frame. Tighten gradually, inspect the seal along the windshield frame after each reinstall, and remember which fastener positions line up best.
- Keep the fastener nut portions clean and free of debris
- Check the seal along the windshield frame after each install
- Have a pop rivet tool ready for the standard kit
Specifications
| Brand | Lange Originals |
|---|---|
| Part number | 020-289 |
| UPC | 859711004100 |
| Operation type | N/A |
| Windshield frame latches | 2 adjustable quick release latches |
| Fasteners | 8 patented 1 & 1/4 turn fasteners |
| Nut plates | 8 |
| Rivets | Sixteen (16) 1/2 rivets and eight (8) 3/16 rivets |
| Body compatibility | Not for fiberglass bodies |
Vehicle fitment
It is a kit for the TJ Wrangler, which uses four rear latches with no drilling. Check fit against your vehicle’s year, model and trim before buying.
The TJ version is the only model-specific detail for this kit. Other Wrangler generations should be checked against your vehicle before buying.
Installation notes
The standard kit needs drilling and a pop rivet tool, so plan for both before starting. Check the body material first, because this kit will not work on fiberglass bodies.
What’s included
The kit includes 2 adjustable quick release latches, 8 patented 1 & 1/4 turn fasteners, 8 nut plates, sixteen (16) 1/2 rivets, eight (8) 3/16 rivets and complete instructions.
Not included: A pop rivet tool is required for installation but is not part of the kit. Have one on hand before starting.









