Overview
The Warn DC 2000 MF Industrial DC Hoist, part number 63899, is a 2000-pound line pull permanent-magnet DC hoist with a wire line and no fairlead. It is a universal fit rather than a vehicle-specific part.
The hoist combines a permanent magnet DC motor with robust sealing and a 3-stage all-metal geartrain. Permanent grease lubrication supports long service life, an automatic mechanical brake holds the full rated load, and the powder-coated finish is designed to resist the elements.
Key features
- Permanent magnet DC motor
- Robust sealing and a proven 3-stage all-metal geartrain
- Permanent grease lubrication
- Automatic mechanical brake that holds the full rated load
- Durable powder-coated finish
- Compact midsize frame with integrated tie bars
- Wire line, no fairlead
Choosing a mounting setup
A hoist of this type is usually mounted to a bumper, a dedicated carrier or a frame-mounted plate, and the mounting point decides how well the unit handles the loads it will see. Before drilling anything, measure the clearance around the drum, the wire line path and the space needed for the brake housing. A line that runs at an angle to the drum can wear unevenly, so plan the layout with rollers or a guide if the line will travel across a wide angle.
Electrical supply matters as much as mounting. A permanent magnet motor draws heavy current under load, so the cable run, fuse and battery should be sized for the hoist and kept short. Voltage drop at the motor shows up as slow line speed and heat, which are early signs the wiring needs attention.
Inspect the hoist after each heavy session. Look for worn or kinked wire line, loose mounting bolts, grease seeping from seals, and any hesitation when the brake releases. Any of these signs means the unit should be checked before the next pull.
- Confirm the battery and cable size before the first pull
- Keep the wire line spooled evenly on the drum
- Re-check mounting bolts after heavy use
Specifications
| Brand | Warn |
|---|---|
| Part number | 63899 (also shown as WAR63899) |
| UPC | 1274863899 |
| Product type | Industrial DC hoist |
| Line pull | 2000 |
| Line type | Wire |
| Winch type | Industrial |
| Fairlead | None |
| Geartrain | 3-stage, all metal |
| Motor | Permanent magnet DC |
| Brake | Automatic mechanical brake |
| Finish | Powder coat |
| Remote control | Ordered separately |
| Fitment type | Universal fit |
Vehicle fitment
The 63899 is a universal fit and is not tied to a specific vehicle. It is built on a compact midsize frame with integrated tie bars, so check the mounting arrangement against the structure you plan to use.
No vehicle list is given for this hoist. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use fasteners of the correct grade and follow the installation steps closely. Winch mounting is load-bearing, so professional installation is recommended.
- Torque all fasteners to the correct value for their grade before first use.
- Re-check the mounting bolts after the first miles of driving and after heavy use.
- Use wiring, fusing and a battery of suitable capacity as specified by the manufacturer.
- Check the controls and brake operation before first use under load.
What’s included
Check the package contents against your installation before starting.
Not included: Controls and accessories, including the remote control, are available separately and are not included.









