Overview
The Lange Originals Crank Hoist-A-Top for one-piece hardtops, part number 014-502, is a hand-operated hardtop removal system. A crank mechanism raises the top to the ceiling of a garage or carport for out-of-the-way storage. The steel frame attaches to the vehicle top without drilling or attaching anything to the top.
The crank uses a high-tensile steel cable design, which differs from rope and pulley hoists. It includes a safety-featured lifting device and rugged construction. The top needs no modifications to use the hoist, and rubber coated hooks and foam covered hardware protect the finish.
Removing the top takes about three minutes and can be done alone, and replacing it is just as easy. It suits owners who want to avoid pulled muscles, strained backs and dropped or damaged tops.
Key features
- Crank operation for lifting the hardtop to the ceiling
- High-tensile steel cable design
- Safety-featured lifting device
- Rugged construction
- Rubber coated hooks and foam covered hardware
- Steel frame with no drilling or attachment to the top
- One-person operation
Working with a crank hoist
A crank hoist trades speed for control, since the top rises gradually as the handle turns. Read the setup steps before the first lift, and make sure the top sits evenly on the frame. Lifting slowly reduces the chance of the top shifting while it is raised toward the ceiling.
Cable hoists need regular inspection because kinks, fraying or stiffness can affect performance. Store the cable coiled loosely away from moisture, and wipe the crank mechanism to keep it turning freely. Keep hands clear of the cable and pulley area while cranking.
Replacing the top is usually a reverse of removal, so take note of the hook positions before lowering. Lower the top onto clean padding and check the hardware for loose fittings before driving.
- Lift in slow, even steps
- Inspect the cable for kinks or fraying
- Keep hands clear of the cable
Specifications
| Brand | Lange Originals |
|---|---|
| Part number | 014-502 |
| UPC | 859711004056 |
| Operation type | Crank |
| Lifting mechanism | Crank with high-tensile steel cable |
| Top type | One-piece hardtops |
| Frame | Steel |
| Hardware | Rubber coated hooks, foam covered hardware |
Vehicle fitment
This hoist is for one-piece hardtops, so check your top style before choosing it. Confirm your vehicle’s year, model and trim before ordering.
The crank model is for one-piece hardtops and is not intended for Freedom hardtops.
Installation notes
Because the frame attaches without drilling, plan the setup before lifting. Keep hands clear of the cable while the top is raised.
What’s included
The hoist includes rugged construction and a safety-featured lifting device. Check the package contents against your installation before starting.














