Overview
The Kleinn Train Horns air compressor wiring kit, part number K/A6852, provides the wires, connectors and other parts used to install a Kleinn air horn system. It includes the parts needed for the installation.
It is universal fit, so it is not tied to a particular make, model or year. Confirm wire length and connector fit for your own air horn and compressor setup before wiring.
Key features
- Wires and connectors for a Kleinn air horn system
- Includes the wires, connectors and other parts for installation
- Universal fit
Planning the air horn wiring
Wiring an air horn system means bringing power from the battery to the compressor and horns, with a switch that tells the system when to sound. Plan the route before cutting any loom. Keep the feed run short where you can, and keep it clear of the exhaust, the drive shaft and any sharp edges that could rub through the insulation over time.
Fuse the positive feed close to the battery so a fault in the wiring cannot draw heavy current through unprotected cable. Use a ground connection to clean bare metal, and tighten it firmly. Once the system is running, check connectors for corrosion and loose crimps after the first few drives, since vibration loosens them quickly on a working vehicle.
- Crimp connectors with the correct tool
- Seal exposed terminals against water
- Secure wire runs with clips at short intervals
Specifications
| Brand | Kleinn Train Horns |
|---|---|
| Part number | K/A6852 |
| Kit type | Air compressor wiring kit |
| Contents | Wires, connectors and other installation parts |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and not vehicle-specific. Confirm wire length and connector size against your air horn and compressor setup before wiring.
Check the wire lengths and connectors against your own air horn and compressor setup before wiring.
Installation notes
Horn wiring involves a power feed, so fuse the feed and disconnect the battery before running wires. Route the wires away from moving parts and heat sources.
What’s included
The wires, connectors and other installation parts for a Kleinn air horn system. Count the pieces against your installation plan when unpacking.
Not included: the air horns, air compressor and air tank, which are sold separately.









