Overview
The Kentrol side steps in polished stainless steel, part number KEN30432, are fixed side steps for classic Jeep models. They fit the 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7, 1981–1985 Jeep Scrambler and 1987–1995 Jeep Wrangler (YJ).
Kentrol describes these steps as an exact copy of the original equipment Jeep steps. They mount to the floor braces welded to the body floor pan, and they are made from 304 surgical stainless steel with a polished finish that Kentrol says will not rust.
Key features
- Copies the design of the original equipment Jeep step
- Mounts to the floor braces welded to the body floor pan
- 304 surgical stainless steel construction
- Polished stainless steel finish
- Stainless steel hardware included with the steps
- Fixed, step-only design
Floor brace and body mounting basics
Side steps on older Jeeps carry weight at the door opening, so the mounting points matter as much as the step itself. Steps that bolt to the floor braces spread load into the frame structure, while worn or rusted braces can leave a step loose. Before fitting, look over the floor braces and the body floor pan for corrosion, since a solid base keeps the step secure.
Polished stainless resists rust well but still needs regular cleaning where road salt collects. Check fasteners after the first few drives and whenever the step feels loose. Where the body has been modified, such as with fender well headers or rocker protection, confirm that the step still has clearance.
- Inspect floor braces for rust before installing
- Recheck fasteners after the first few drives
- Clean road salt from the polished surface regularly
Specifications
| Brand | Kentrol |
|---|---|
| Part number | KEN30432 |
| Material | 304 surgical stainless steel |
| Finish | Polished/stainless steel |
| Length | Step only |
| Operation | Fixed |
| Fitment type | Direct fit |
| Drilling | Some drilling required |
| Mounting | Floor braces welded to the body floor pan |
| Body restriction | Not for vehicles with fender well headers or body side protection such as Nerf bars or rocker skids |
| Hardware | Stainless steel, included |
Vehicle fitment
The manufacturer list covers four models: 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade trims), 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims), 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL and SR trims) and 1987–1995 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims).
TJ, XJ and later Wrangler generations are not on this list, and the CJ models are limited to the years shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some drilling is required. On a fiberglass body, use spacers so the step sits level with the body edge. Longer hardware is also needed for a fiberglass body and must be obtained separately. These steps do not work on vehicles with fender well headers or body side protection such as Nerf bars or rocker skids. Wear eye protection when drilling.
What’s included
Stainless steel hardware is included with the steps.
Not included: Longer mounting hardware for fiberglass bodies, which must be obtained separately. Check the package contents against your installation before starting, including whether spacers are needed.









