Overview
The Carr Super Hoop Multi-Mount System in polished finish, part number CAR120552, is a fixed step for Jeep Wrangler LJ and TJ models. It fits the 2004–2006 Jeep Wrangler LJ, including Unlimited and Unlimited Rubicon trims, and several 1997–2006 Jeep Wrangler TJ trims.
The step comes in three finishes: polished, titanium silver powder coat and black powder coat. The polished version uses a mechanical polish designed to resist rust, cracking and peeling and needs very little maintenance. Both powder coats have a lightly textured matte finish designed to resist scratching, peeling and fading.
Key features
- Polished finish, which Carr identifies as XM3 Polished Chrome Like
- Exclusive diamond non-slip tread pattern across the flat step area
- Multi-mount system with mounting heads that rotate for a precise fit
- Rocker panel mounting is designed for a straightforward installation.
- Compact step pad with a 10-inch width
- Limited lifetime warranty on materials and craftsmanship
Mounting heads and alignment
Multi-mount steps rely on the mounting heads to set the position, so take time to align them before the fasteners are fully tightened. The rotating heads help dial in a level step, which matters for footing and for appearance. Check that the step sits evenly on both sides and does not twist when weight is applied.
A polished finish reflects light well but shows water spots and grime, so dry it after washing and keep a soft cloth handy. Rocker panel installs can collect debris near the bracket, so clean that area when you check the hardware. Before any off-road trip, recheck the fasteners and inspect the tread for wear, since a shifting step can scrape the body or fail under load.
- Align the mounting heads before final tightening
- Dry the polished finish after washing
- Recheck fasteners before each off-road trip
Specifications
| Brand | Carr |
|---|---|
| Part number | CAR120552 |
| Finish | Polished (XM3 Polished Chrome Like) |
| Other finishes | Titanium Silver Powder Coat (XP4), Black Powder Coat (XP3) |
| Material | Zinc plated steel; die-cast aluminum alloy also described |
| Step pad width | 10 inch |
| Tread | Diamond non-slip pattern |
| Length | Step only |
| Operation | Fixed |
| Fitment type | Direct fit |
| Mounting | Rocker panel with multi-mount system |
Vehicle fitment
The manufacturer fitment list for this step covers two Jeep Wrangler generations: 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon trims, and 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Jeep Wrangler JK, JL and YJ generations do not appear on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting heads turn to help line up the step during a rocker panel install. Check the package for mounting hardware before starting. Support the vehicle on stands before working near the rocker panel.
What’s included
The product is one polished step with Carr’s multi-mount system. Check the package contents for hardware before installation. The step carries a limited lifetime warranty on materials and craftsmanship.











