Select your vehicle
-13%

Jet Performance Products Ford Performance Module – 88903

Jet Performance Products

Shop Ford F-250 Computer Programmers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Jet Performance Products Ford Performance Module, part number JET88903
  • Fits 1989 Ford Bronco, F-150 and F-250 trucks
  • Plug-in module with one tune; Jet says up to 30 horsepower
  • Monitor not included; not selectable on the fly

Description

Overview

The Jet Performance Products Ford Performance Module, part number JET88903, is a plug-in tuning module for the 1989 Ford Bronco in Custom, Eddie Bauer and XLT trims, the 1989 Ford F-150 in Custom, XL and XLT Lariat trims, and the 1989 Ford F-250 in the same trims.

Trucks of this era were tuned through an engine computer that is difficult to swap, so Jet built an external module instead. The module is designed to add up to 30 horsepower by optimizing spark advance, fuel ratios and transmission shifting. It is a single-tune unit, and its combinations apply to the 1989 model year.

Key features

  • Attaches to the vehicle computer from the outside
  • Designed to add up to 30 horsepower
  • Optimizes ignition spark advance
  • Optimizes air to fuel ratios
  • Optimizes transmission shifting
  • One tune, not selectable on the fly

Plug-in tuning on older trucks

Module-based tuning on a 1989 truck depends heavily on the condition of the wiring, sensors and computer connections. Older harnesses can corrode or lose pin tension, and a poor connection can cause rough running that looks like a tuning problem. Take time to inspect the plug, ground points and nearby wiring before attaching any external device.

Because the module is a single tune, it suits drivers who want one setting and no on-the-fly changes. Fuel economy, idle quality and cold starts should be watched after installation, since they show whether the tune matches the engine’s condition. Replace worn ignition parts and check the fuel filter before expecting changes in performance.

  • Inspect connectors for corrosion
  • Recheck idle after the first few drives

Specifications

Brand Jet Performance Products
Product Ford Performance Module
Part number JET88903
Number of tunes 1 Tune
Selectable on the fly No
Monitor Not included
Power claim Up to 30 horsepower (Jet’s figure)
Fitment Direct fit

Vehicle fitment

It fits the 1989 Ford Bronco in Custom, Eddie Bauer and XLT trims, the 1989 Ford F-150 in Custom, XL and XLT Lariat trims, and the 1989 Ford F-250 in Custom, XL and XLT Lariat trims.

Other model years and the F-350 are not on this list, and other generations of these trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the module attaches externally, the work is a connection to the computer rather than a chip swap. Trucks from 1989 have aged wiring, so inspect the connectors and harness before plugging in. Keep the key off and the battery disconnected during connection.

What’s included

The module provides one tune.

Not included: A monitor.

Fitment

VehicleYearsTrims
Ford Bronco1989Custom, Eddie Bauer, XLT
Ford F-1501989Custom, XL, XLT Lariat
Ford F-2501989Custom, XL, XLT Lariat

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Jet 88903 fit a 1989 Ford Bronco XLT?

Yes. It fits the 1989 Ford Bronco in Custom, Eddie Bauer and XLT trims. Confirm the trim before ordering, since other Bronco trims are not covered.

Does the JET88903 fit a 1989 F-350?

No. The 1989 coverage includes the F-150 and F-250 only, so an F-350 from that year does not fit this module. Check your year, model and trim before ordering.

Is the JET88903 selectable on the fly?

No. The module is not selectable on the fly and comes with one tune, so the setting stays fixed while the vehicle runs. A monitor is not included and would need a separate purchase.

How do I know if the truck needs a fuel system check first?

Look for hard starts, hesitation under load, or a fuel smell. These signs point to fuel delivery or filter problems that should be fixed before adding a tune. Address them first so the module tunes a healthy engine.

Can the module be removed for service?

Yes. Keep the key off and the battery disconnected while unplugging it, then reconnect only after the engine work is finished. Recheck the connectors afterward.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-250 Computer Programmers on Amazon