Overview
The Jeep Steering Knuckle, part number JEP68004087AA, is a stock replacement steering knuckle for the 2007–2018 Jeep Wrangler (JK). It is a factory replacement part with direct fit.
A steering knuckle carries the wheel hub and connects to the steering linkage, so fitment matters. This knuckle is not compatible with cross over steering or high steer setups.
Key features
- Factory stock replacement steering knuckle
- Not cross over steering compatible
- Not high steer compatible
- Part number JEP68004087AA from Jeep
Steering geometry and alignment
The steering knuckle is the pivot point for the front wheel, so its position and the joints around it control steering angle and toe. Replacing one shifts the geometry slightly, which is why an alignment check matters after the job. Worn ball joints, tie rod ends and track bar bushings can also affect how the new knuckle steers, so inspect them while the front end is apart.
Knuckles should be inspected for cracks, bent arms and worn bores when the hub is removed. Check the hub and bearings for play, and clean the mating surfaces so bolts seat with the right clamping force. If the vehicle runs a steering kit or lift, confirm the knuckle matches that setup before buying.
Specifications
| Brand | Jeep |
|---|---|
| Part number | JEP68004087AA |
| Replacement type | Stock replacement |
| Cross over steering compatible | No |
| High steer compatible | No |
| Fitment type | Direct fit |
Vehicle fitment
Jeep’s manufacturer fitment list covers the 2007–2018 Jeep Wrangler (JK) with 2-door and Unlimited 4-door trims, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X editions.
Other Wrangler generations and the Gladiator are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a steering knuckle changes front geometry, so have a front-end alignment checked after the work.
What’s included
Only the steering knuckle is described. Not included: Confirm whether hub, bearings, ball joints and other knuckle hardware are needed for your installation before starting.









