Overview
The Jeep 6104716AB is a factory style double-ended stud nut for the slave cylinder. It fits two-door and four-door models with 2.8L and 3.8L engines, covering the 2007–2011 Jeep Wrangler (JK).
The part number is 6104716AB, and it is a factory style replacement part.
Key features
- Factory style replacement part
- Double-ended stud nut for the slave cylinder
- Covers two-door and four-door Wrangler JK models
- Fits 2.8L and 3.8L engines
Slave cylinder stud and clutch line
The slave cylinder is mounted to the bellhousing and pushes the clutch fork when the pedal is pressed. A double-ended stud threads into the housing so the cylinder can be held firmly in place. If the threads are stripped or the stud is loose, the cylinder can move and affect clutch engagement.
Before installing a new stud nut, clean the threads and check the bellhousing for cracks or corrosion. Inspect the hydraulic line connection and the clutch fluid for leaks while the cylinder is off. A new stud should thread in by hand before tightening, and fasteners should be tightened gradually to avoid cross-threading. Bleed the clutch hydraulics after reassembly if air has entered the system, and check the pedal feel before driving.
Specifications
| Brand | Jeep |
|---|---|
| Part number | 6104716AB |
| Part type | Double-ended stud nut |
| Application | Slave cylinder |
| Engines | 2.8L and 3.8L |
| Fitment years | 2007–2011 (Wrangler JK) |
Vehicle fitment
It covers the 2007 through 2011 Jeep Wrangler (JK), including two-door and Unlimited four-door models.
Wrangler JK years from 2012 onward, and Wrangler TJ, LJ and JL models, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One double-ended stud nut.









