Overview
The Jeep 52060062AG is a factory replacement transfer case shifter assembly for the NVG421 transfer case. The manufacturer fitment list names 2007–2017 Jeep Wrangler (JK) models, including Rubicon, Sahara, Sport, X and Unlimited trims.
It is a factory replacement part carrying Jeep’s own part number.
Key features
- Factory replacement part from Jeep
- Shifter assembly named for the NVG421 transfer case
- Jeep part number 52060062AG
- Manufacturer fitment lists 2007–2017 JK models
Shifter care and wear
A transfer case shifter sends the selection from the cab to the transfer case through a linkage, and the bushings and pivots at each joint are where play develops first. Sloppy engagement, a lever that moves without the transfer case following, or stiff movement between positions usually points to worn linkage rather than a problem inside the case. Inspect the linkage with the vehicle raised and the parking brake set.
When replacing a shifter assembly, check the shift rod for bends, the shifter housing for cracks and the boot for tears that could let water and grit into the mechanism. Keep the transfer case fluid at its proper level and look for leaks at the shifter housing after the first few drives. Lightly lubricating the pivots can help smooth engagement, but excess grease should be wiped away so it does not attract dirt.
Specifications
| Brand | Jeep |
|---|---|
| Part number | 52060062AG |
| UPC | 700007590811 |
| Part type | Shifter assembly |
| Transfer case | NVG421 |
Vehicle fitment
The manufacturer fitment list covers 2007–2017 Jeep Wrangler (JK) models in the trims shown above.
2018 Wrangler JK models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The transfer case shifter assembly, part 52060062AG.
Not included: Check the package contents against your installation, and have any other transfer case parts you need on hand.









