Overview
The Jeep 68002996AA is an electronic sway bar disconnect OEM wiring harness for 2 and 4-door Jeep models. It is a Mopar factory replacement harness with a direct plug-in connection.
It is a Chrysler supplied Mopar replacement, sourced through Jeep factory channels for the vehicles it covers.
Key features
- Factory OEM wiring harness
- Direct plug-in connection
- For 2 and 4-door models
- Mopar factory replacement part, Chrysler supplied
Wiring checks before installing
Electronic sway bar disconnect systems use a harness to send signals between the switch, the actuator and the vehicle’s electrical system. Damaged wiring can cause warning lights, a disconnect that will not engage, or intermittent faults. Before installing, look for melted insulation, bent pins and brittle clips, because these failures often show up after a harness has been stretched or pinched.
Route the harness away from exhaust parts, moving suspension components and sharp edges, and secure it with the original clips. Keep connectors dry and clean, and use dielectric grease only where the connector design calls for it. Confirm that each connector clicks fully into place before reconnecting the battery.
After connecting, test the switch through its full range before driving. Recheck the routing after the first few drives, since a harness that rubs once can wear through over time and cause a fault later.
Specifications
| Brand | Jeep (Mopar) |
|---|---|
| Part number | 68002996AA |
| UPC | 70000439694 |
| Harness type | Electronic sway bar disconnect OEM wiring harness |
| Models | 2 and 4-door |
| Connection | Direct plug in |
| Mounting location | Front |
| Spring rate | Single rate |
| Type | Locking |
Vehicle fitment
It is designed for 2 and 4-door Jeep models. Match your vehicle’s year and model to the harness before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The harness plugs in directly, so no splicing is needed. Disconnect the battery before connecting or disconnecting any electrical component.
What’s included
One OEM wiring harness for the electronic sway bar disconnect.
Not included: This harness does not include the electronic sway bar disconnect switch or the sway bar assembly.








