Overview
The Moog idler arm K8739T is a steering linkage part. The idler arm supports the linkage on one side of the steering system and pivots as the wheels turn, so a worn arm can produce looseness and steering wander. The suffix T is part of the part number.
The Problem Solver design uses a powdered metal gusher bearing that routes grease through the bearing to the stud. A patented cover plate allows tighter tolerances, a full ball metal stud rotates through 360 degrees, and patent pending Sunoloy coated bearings support smooth stud swing.
Key features
- Gusher bearing with grease flow to the stud.
- Patented cover plate design.
- Full ball metal stud with 360 degrees of rotation.
- Patent pending Sunoloy coated metal bearings.
Idler arm wear and inspection
An idler arm carries steering loads rather than drive torque, but it pivots with every turn of the wheel. Over time the pivot bushing or bearing wears, and the arm can develop play that shows up as wander or a loose feel at the wheel. Raising the front end and rocking the arm by hand is a simple way to check for play before any work begins.
When the arm is replaced, inspect the tie rod ends and drag link at the same time, since they share the same wear pattern and loads. Pivot bolts should be tightened to the vehicle’s specification, and the new arm should move freely without binding through the full range of steering travel.
- Looseness or play at the pivot
- Clunking over bumps
- Uneven tire wear from misaligned steering
- Stiff or notchy movement through the arm
Specifications
| Brand | Moog |
|---|---|
| Part number | K8739T |
| UPC | 80066274645 |
| Product type | Idler arm |
Vehicle fitment
Vehicle fit is not confirmed for specific vehicles. A steering idler arm must match the vehicle’s linkage layout, so check the part number and the arm’s dimensions against your original part before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing an idler arm shifts steering geometry, so the front end should be aligned once the arm is installed. Check the linkage for play after the work and before any highway driving.
What’s included
One Moog idler arm, part number K8739T.
Not included: Mounting hardware and any bracket are not included. Check the package contents against your installation before starting.









