Select your vehicle

Trail Gear Steering Arm Set – 130002-1-KIT

Trail Gear

Shop Trail Gear Steering Arms on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Steering arm set supplied as a pair
  • 4 stud arms
  • Forged from 8620 tool steel with machined mounting surfaces
  • Angle compensated so rod ends ride at the factory 90 degree angle
  • For Toyota Pickups and 4Runners

Description

Overview

The Trail Gear 130002-1-KIT is a pair of 4-stud steering arms for Toyota Pickups and 4Runners. The arms are forged high steer arms for these trucks, and each one is pressure forged from 8620 tool steel.

The mounting surfaces, including the split washer surface and tie rod tapered holes, are machined so the parts seat correctly, which helps keep knuckle studs and tie rod ends from loosening.

Key features

  • Pressure forged from 8620 tool steel
  • Machined split washer surfaces
  • Tie rod tapered holes machined for positive contact
  • Angle compensated arms, rod ends at the factory 90 degree angle
  • 4-stud design, supplied as a pair

Steering arm inspection and care

Steering arms carry steering loads from the tie rods to the knuckles, so they are a key link in the steering geometry. Wear in the arm, the stud holes or the joints at either end shows up as play in the steering wheel, uneven tire wear or a wandering feel on the road. Looking at the arms during any suspension work is a practical way to catch problems early.

When replacing arms, clean the mounting surfaces and check that the washers and nuts seat fully. Tighten fasteners to the values in your service information and recheck them after the first few drives. A wheel alignment is normally needed after steering components change, so plan for one once the new arms are in.

  • Check stud threads and nuts for wear
  • Inspect tie rod ends for play
  • Clean mounting surfaces before assembly
  • Get an alignment check after replacing arms

Specifications

Brand Trail Gear
Part number 130002-1-KIT
UPC 70000621522
Material 8620 tool steel
Studs 4
Quantity Pair
Rod end angle 90 degrees, factory design

Vehicle fitment

No model years are given, so year-specific fitment is not confirmed. Confirm your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The set is a pair of steering arms with 4 studs. Confirm any hardware needs against your installation before starting.

SKU: TGI130002-1-KIT Category:

Specification

Shipping weight 12.00 lbs
Package dimensions 13.00 × 13.00 × 4.50 in
brands

Questions & Answers

What is the Trail Gear 130002-1-KIT?

It is a steering arm set from Trail Gear, supplied as a pair with 4 studs. The arms are pressure forged from 8620 tool steel and named for Toyota Pickups and 4Runners.

Does this arm set fit my Toyota?

The arms are for Toyota Pickups and 4Runners, but year-specific fitment is not confirmed. Confirm your year, model and trim before ordering.

What makes these arms angle compensated?

The arms are angle compensated, so the rod ends sit at the factory 90 degree angle. The mounting surfaces and tie rod tapered holes are machined for correct contact.

How do I know the steering arms need replacing?

Look for cracks around the arm body, bent or worn stud holes, and looseness at the tie rod or knuckle connection. Damaged mounting surfaces are a reason to replace the arms, since loose joints can change steering feel.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear Steering Arms on Amazon